LAFCPUG:AppleCare Docs

From FAQwiki

Revision as of 07:52, 14 June 2008 by WikiSysop (Talk | contribs)
Jump to: navigation, search

Final Cut Pro

The following are AppleCare technical documents and are considered the "definitive" answer to your Final Cut Pro problem.] That is if the answer you are looking for is in one of these docs. We will continue to add to this list as Apple adds to the list. As of this writing the list covers FCP 5.0 to 6x only. Final Cut Pro Support


Find Apple Final Cut Studio QT Video Tutorials HERE

Final Cut Studio: Optimizing PCI Express card performance
earn about PCI Express (PCIe) slot configuration for Mac Pro computers
manufactured before 2008. Mac Pro (Early 2008) computers and later
automatically configure bandwidth of the PCIe slots.

Final Cut Pro: Improving performance using an AJA Kona card with a Mac Pro
if you use an AJA Kona card for video capture and playback with a Mac Pro,
there are a number of factors you should consider to enhance performance.
The most common issues and solutions are...

Final Cut Studio: Encoders not seen in export options
With QuickTime 7.4 or later installed, some older encoders (codecs)
may appear to be missing in the export options in applications
that export QuickTime files, such as Final Cut Pro or Compressor
or from the export options in QuickTime Player Pro.

Final Cut Pro: Dropped Frames--Causes and Solutions
Dropped frames in Final Cut Pro are usually caused by hardware
configuration issues. This document covers a number of reasons
dropped frames may occur, and ways to address them.

Final Cut Pro and Final Cut Express: Application-specific key functions with the aluminum Apple Keyboard (2007)
The aluminum Apple Keyboard (2007) includes additional media keys
and newly-labeled keys which may seem to replace the functionality
of certain application-specific function keys, such as the F10 function
"Overwrite Edit" in Final Cut Pro and Final Cut Express.

Final Cut Pro 6.0.2: Holding the Option key invokes snapping
In Final Cut Pro 6.0.2, snapping may become enabled when it's
not desired if you hold the Option key while dragging an edit
point in the Timeline. In regular use, holding the Option key
while dragging the audio or video of a linked item allows you
to trim either the audio or the video of a clip independently,
without having to unlink that clip.

Final Cut Pro: Render required when outputting to tape
On PowerPC-based Macs and when the Video Scopes window is open,
Final Cut Pro may unexpectedly require rendering before outputting to tape.

Final Cut Pro: Disabling visibility and its effects on rendering
When working with multiple tracks in Final Cut Pro, you may find it useful
to turn off visibility for some onscreen elements to focus on a particular
area of detail in a sequence.

Final Cut Pro: Tips for archiving memory card-based media
Standard tapeless workflows involve reformatting and reusing the memory
cards used for shooting. Before reformatting the cards, it's prudent to
make a backup copy of your media on hard disk, whether for safety
or for recapture later on. This article discusses guidelines for reliable backup.

Final Cut Pro: "This project is unreadable or may be too new for this version of Final Cut"
When you open certain Final Cut Pro projects, you may see the
following message: This project is unreadable or may be too new
for this version of Final Cut.

Final Cut Pro: Escape key may not end HDV capture
When you perform a Capture Now to acquire HDV media in
Final Cut Pro and the capture passes the area of recorded
HDV video at the end of a tape, pressing the Escape key
may not end the capture

Final Cut Pro 6: About the Render All command
The choices in the Sequence > Render All submenu will
render all the clips in a sequence (Both, Video, or Audio)
that correspond to the render categories that are enabled
(listed with checkmarks).

Final Cut Pro, Final Cut Express: Troubleshooting FireWire using direct connections
When using Final Cut Pro or Final Cut Express with a FireWire device,
you may occasionally encounter unexpected behavior with video,
audio, or device control.

Final Cut Pro, Final Cut Express: Unexpected quit with Panasonic HDC-SD9 AVCHD
Final Cut Pro and Final Cut Express may quit unexpectedly
when using the Log and Transfer window to preview AVCHD
media from a Panasonic HDC-SD9 camcorder.

Final Cut Studio: Kernel Panic with Kona 3 cards on Mac Pro
If your Mac Pro has Mac OS X 10.5.2 Leopard and a Kona 3 PCI Express
(PCIe) card, a kernel panic may occur in some unsupported PCIe
slot configurations. Specifically, this may occur if the PCIe slot
hosting the Kona 3 card is configured as an x1 lane slot.

Final Cut Pro 6: May quit unexpectedly when transferring from multiple P2 volumes
On computers with Mac OS X 10.4, Final Cut Pro 6 may quit
unexpectedly while you're using the Log and Transfer
window to transfer media from Panasonic P2 cards.
If you have multiple P2 volumes mounted simultaneously,
the likelihood of this happening may increase.

Final Cut Pro, Final Cut Express: Computer and camera show different points in time while capturing HDV
When you capture footage from an HDV camera using Final Cut Pro,
the image displayed in the capture window may lag slightly behind the
image displayed on the camera. This is normal and does not indicate any
issue with Final Cut Pro or your camera.

Final Cut Studio: Some AU filters are not available in earlier Mac OS versions
If you create a project using Final Cut Studio on a computer with Mac OS X 10.5
Leopard and then open that project in Mac OS X 10.4 Tiger, in some cases you
may see a message like the following (as seen in Final Cut Pro):...

Final Cut Pro: Larger-than-HD ProRes clips may not play smoothly
On computers with Mac OS X 10.4 Tiger, clips in the Apple ProRes 422
format may not play back smoothly in Final Cut Pro if they are larger
than HD size in dimension.

Final Cut Pro: Audio sync in PAL video sequences
Imported audio-only files in a sequence with PAL video may drift out of sync in some cases.

Final Cut Pro 6.0.2: QuickTime 7.3 or later is required

Final Cut Pro 6: About the Log and Transfer Window

Final Cut Pro 6: Rendered items may require re-rendering after opening project

Final Cut Pro 4: Not supported on Mac OS X 10.5 Leopard
Issue: Final Cut Pro 4 and earlier versions are not supported on Mac OS X 10.5 Leopard.

Final Cut Pro 6.0.2: Render quality settings and render times

Final Cut Pro 6: Log and Transfer may fail if "FxFactory" is installed

Final Cut Pro: Choosing a Hard Disk.
The disk that contains your computer’s operating system is called the startup disk or boot disk. ...
2007-11-19 — Document No. 58636

Final Cut Studio: Color space settings for REDCODE to ProRes transcoding.
Issue. When using Compressor 3.0.2 to transcode clips from ...
2007-11-20 — Document No. 307061

Final Cut Pro 6: Master Templates do not display in Mac OS X 10.5 Leopard.
Issue. On computers running Mac OS X 10.5 Leopard, Master...
2007-11-19 — Document No. 306892

Final Cut Studio: How to optimize PCI Express card performance.
When usingFinal Cut Studio in a configuration that uses more than ...
2007-11-12 — Document No. 306913

Final Cut Studio: Format new hard disks as Mac OS Extended for best performance .
Hard disk drives are sometimes sold pre-formatted ...
2007-11-15 — Document No. 306971

Final Cut Pro: Intermittent stream breaks with JVC GY-HD250U.
Issue. When capturing from the JVC GY-HD250U camcorder, it's possible ...
2007-11-14 — Document No. 306930

Final Cut Pro: Dropped Frames--Causes and Solutions.
Dropped frames in Final Cut Pro are usually caused by hardware configuration issues. ...
2007-11-16 — Document No. 58640

Final Cut Pro: Update Final Cut Pro 6.0.2 and Motion 3.0.2 together.
Issue.Final Cut Pro 6.0.2 and Motion 3.0.2, along with the Pro...
2007-11-15 — Document No. 307045

Final Cut Pro: Unexpected Quit during AVCHD ingest.
Issue. Final Cut Pro 6 may unexpectedly quit when attempting to transfer AVCHD...
2007-11-09 — Document No. 306922

Final Cut Pro: Drop zone content is lost if project is moved to another computer.
Issue. If you use Master Templates in Final Cut...
2007-10-02 — Document No. 306595

Final Cut Studio 2: Option to install Final Cut Pro is dimmed.
Issue. If you install Final Cut Studio 2 after having installed Logic ...
2007-09-26 — Document No. 306567

Final Cut Pro: Media-Managed projects with .stap files may not open on other computers.
Issue or symptom. If you use the Send To Soundtrack ...
2007-09-17 — Document No. 306370

Final Cut Pro 6: 1080p24 workflow for Canon HV20 camcorder.
This advanced article discusses workflow ideas for incorporating 1080p24...
2007-09-11 — Document No. 306389

Final Cut Pro 6.0.1: H.264 playback in Viewer results in "General Error".
Issue or symptom. In Final Cut Pro 6.0.1, if you attempt ...
2007-07-27 — Document No. 306072

Final Cut Pro 6: Rendered items may require re-rendering after opening project.
Issue or symptom. In some cases, rendered items may...
2007-07-26 — Document No. 306068

Final Cut Pro: Error 12 message when performing Media Manager operation on clip with long file name.
Issue or symptom. Performing...
2007-07-23 — Document No. 306080

Final Cut Pro 6.0.1: About transferring AVCHD footage
You can transfer AVCHD footage to your scratch disk using the Log and Transfer window in Final Cut Pro. ...
2007-07-16 — Document No. 305997

Final Cut Pro 6: About loading network settings on a per ...
About loading network settings on a per-workstation basis. Final Cut Pro checks local and network directories on startup. ...
2007-07-11 — Document No. 305965

Final Cut Studio 2: Tips for creating and using templates
Master templates in Final Cut Pro are templates created in Motion that ...
2007-07-11 — Document No. 305967

Final Cut Pro 6.0.1: Working with spanned AVCHD clips
A spanned AVCHD clip is a clip that consists of two or more media files. Spanned...
2007-07-03 — Document No. 305833

Final Cut Pro 6.0.1: HD ProRes 422 capture requires Mac Pro or ...
HD ProRes 422 capture requires Mac Pro or Power Mac G5 Quad 2.5 Ghz. Capturing HD resolution video using the ...
2007-06-29 — Document No. 305582

Final Cut Pro 6.0.1: Incorrect AVCHD clips may be transferred
Issue or symptom.Final Cut Pro 6.0.1's Log and Transfer window allows ...
2007-06-29 — Document No. 305831

Final Cut Pro 6: "Media Manager File Trim" issue resolved by Mac OS X 10.4.10 Update.
Issue or symptom. If you are using Final Cut...
2007-06-26 — Document No. 305734

Final Cut Pro: Additional RAM may be recommended for High Definition video formats.
Issue. Final Cut Pro may drop video frames in ...
2007-06-14 — Document No. 305177

Final Cut Pro 5: Subclips may result from batch capture of 720p, 60 fps media.
If you're capturing 720p HD media at 60 frames per ...
2007-06-11 — Document No. 302917

Final Cut Pro 6: HD ProRes 422 capture requires Mac Pro
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with Intel Xeon processors and a qualified third-party capture card.
2007-06-01— Document No. 305582

Final Cut Pro: Render CAF files for Timeline playback
Final Cut Studio 2 supports the preview and playback of CAF (Apple Core Audio Format) audio content. ...
2007-05-29 — Document No. 305561

Final Cut Studio: Third-party appearance themes may cause issues
Issue. If you have installed third-party appearance modifications ...
2007-05-31— Document No. 305566

Final Cut Pro: FxPlug - Working with high RGB values in High ...
Many FxPlug filters in Final Cut Pro and Motion are able to generate very high RGB values, even extending beyond the gamut of traditional video.
2007-05-23— Document No. 305548

Final Cut Pro 6: Limitations in exported OMF files  

This document discusses some details to keep in mind when exporting OMF files from Final Cut Pro. ...
2007-05-17 — Document No. 305431

Final Cut Pro 6: Subclips in multiclips in mixed-frame-rate ...
Final Cut Pro 6: Subclips in multiclips in mixed-frame-rate sequences. Background. Normally, in cases where a subclip's frame rate
and a sequence's frame rate do not match, adding the subclip to the sequence may cause the subclip limits to be adjusted and new clip In and Out points to be set.
2007-05-17 — Document No. 305473

Final Cut Pro: "Error sending selection to Soundtrack Pro"
Issue. If you use Final Cut Pro to send a selection to Soundtrack Pro ...
2007-05-17 — Document No. 305466

Final Cut Pro: Digital Cinema Desktop displays white
Issue. Final Cut Pro's Digital Cinema Desktop feature may display a blank white ...
2007-05-15 — Document No. 305502

Final Cut Studio 2: About the Outer Glow filter
... You may already be familiar with this filter, as it was also available in Motion2. In Final Cut Studio 2, the Outer Glow filter is available in both ...
2007-05-17 — Document No. 305504

Final Cut Studio 2: Don't keep older versions of applications when ...  

Don't keep older versions of applications when upgrading. Issue. Earlier versions of the applications in Final ...
2007-05-17 — Document No. 305389

Final Cut Studio 2: Installation progress sometimes remains at 100 ... 

Installation progress sometimes remains at 100%. Issue or symptom. At some points of the Final Cut Studio installation the progress indicator
may stay at 100% for longer than the "Time Remaining" indicates.
2007-05-17 — Document No. 305412

Pro applications on PowerPC computers may quit unexpectedly on ...
Pro applications on PowerPC computers may quit unexpectedly on launch or quit, or display non-customary menus and dialogs. If you ...
2007-05-17 — Document No. 301838

Final Cut Pro 5: Connecting your DV camcorder or deck to your ...
To capture video footage from a DV camcorder or deck into Final Cut Pro 5, you need to properly connect the device to your computer and turn it on.
2007-06-08 — Document No. 301506

Final Cut Pro: Avoid using both drop frame and non-drop frame ...
Final Cut Pro: Avoid using both drop frame and non-drop frame timecode on the same tape. Capturing from tapes recorded with both ...
2007-06-04 — Document No. 304359

Final Cut Pro 5 may fail to open with 64 or more QuickTime components installed
...in /Library/QuickTime/, Final Cut Pro may fail to start. ... Final Cut Pro 5. ... issue is addressed by the QuickTime 7.1.5 Update ...
2007-03-07 — Document No. 304477

Final Cut Pro 4.5 and Final Cut Express 3.0: Issues with Mac OS X 10.4.9.
Issue. Final Cut Pro 4.5 and Final Cut Express 3.0 may drop frames...
2007-03-21— Document No. 305284

Final Cut Pro: Restart Final Cut Pro after sleep to prevent ...
Final Cut Pro: Restart Final Cut Pro after sleep to prevent display issues. Issue. If you put your computer to sleep while Final Cut ...
2007-03-09— Document No. 305216

Final Cut Pro: Subclip sent to Soundtrack Pro may be longer than ...
Final Cut Pro: Subclip sent to Soundtrack Pro may be longer than intended. Issue or symptom. When you send a subclip from Final Cut Pro to a Soundtrack Pro Audio ...
2007-03-05— Document No. 305198

Final Cut Pro: Using CMYK JPEG Images
Final Cut Pro: Using CMYK JPEG Images. Convert JPEG image files that use the CMYK color space so they use the RGB color space. Final ...
2007-03-07— Document No. 93522

Final Cut Pro: Insert Edit/Assemble Edit unavailable in Edit to Tape window.
The Edit to Tape features in Final Cut Pro require precise ...
2007-01-09— Document No. 304959

Final Cut Studio: For best performance on Mac Pro, install memory in risers symmetrically.
Final Cut Studio's performance benefit ...
2007-02-26 — Document No. 304492

Final Cut Pro: P2 clips should be named with fewer than 255 characters.
If you name a P2 clip with a very long name in the Import Panasonic P2 window, it's possible that the clip might not be added to your project when you import.
2007-02-28 — Document No. 305179

Final Cut Pro: Ethernet network volumes should not be used for ...
... as well as any traffic on the network generated by ... smooth transfer of video and audio data needed by Final Cut Pro. (This includes "wired" Ethernet formats, as ...
2007-02-15— Document No. 305131

Final Cut Pro: Blank image may result if the end of a sequence is ...
Blank image may result if the end of a sequence is exported as a Photoshop image. Issue. If you export a still image ...
2007-01-16— Document No. 304982

Final Cut Studio: Don't rename or relocate Final Cut Studio ...
Don't rename or relocate Final Cut Studio ... While Final Cut Studio applications may perform normally in many cases if renamed, or if ...
2007-01-17 — Document No. 304983

Final Cut Studio: Video out from Motion or Final Cut Pro is ...
Video out from Motion or Final Cut Pro is sometimes sporadic. Issue or symptom. Video out to an external monitor ...
2007-01-16 — Document No. 304979

Final Cut Pro 5.1.2: FxPlug Restrictions and Troubleshooting.
FxPlug Restrictions and Troubleshooting.
2006-09-30— Document No. 304471

Final Cut Pro: Unexpected Quit with P2 import.
Issue. Final Cut Pro 5 may unexpectedly quit when using the Import Panasonic P2 feature ...
2006-12-05— Document No. 304866

Final Cut Pro: Cancelling render may change the render state of audio tracks
2006-12-13— Document No. 304881

Final Cut Pro: Notes for setting Scratch Disks on Xsan.
2006-01-13— Document No. 58640

Final Cut Studio: Best practices when naming projects and assets
2006-12-13 — Document No. 304885

Final Cut Pro 5: Unexpectedly quits after importing XDCAM Clips.
it's possible for Final Cut Pro to enter a condition where it may unexpectedly quit
..2006-07-19— Document No. 304033

Final Cut Pro: Multiclips may lose sync if "Remove Subclip Limits" is used.
Issue. If you have a multiclip that has unexpectedly lost ...
2006-10-31— Document No. 304667

Final Cut Pro: Avoid enabling audio preview when capturing DVCPRO HD over FireWire. When capturing DVCPRO HD footage over FireWire ...
2005-08-31— Document No. 302158

Final Cut Pro: Assemble Editing with a Panasonic VTR
... Duplicate frames at the In point. Solution. Update to Final Cut Pro 5.1.2 to prevent these symptoms.
2006-10-10— Document No. 302458

Final Cut Pro 5, Xsan: "Unable to set scratch disk" error on Xsan ..
2005-05-11— Document No. 301197

Final Cut Pro 5.1: About timecode accuracy with Analog-to-DV converters.
Summary. This document discusses an issue that can occur ...
2006-07-25— Document No. 304073

Pro applications quit unexpectedly on launch or quit, or display ...
2006-11-07— Document No. 301838

Final Cut Pro: Minimum Allowable Free Space setting fails with HDV.
Final Cut Pro's preferences include a setting that lets you set ...
2006-07-29— Document No. 304098

Final Cut Studio: About external video-monitoring conflicts.
Summary. Some of the applications included with Final Cut Studio are ...
2006-10-24— Document No. 304214

Final Cut Pro: Nested Cross Dissolves with still-images may produce unexpected results. When working with still-image clips, Cross ... 2006-09-29— Document No. 304467

Final Cut Pro: Avoid using both drop frame and non-drop frame timecode on the same tape.
Capturing from tapes recorded with both...
2006-09-15— Document No. 304359

Final Cut Pro: Abort Capture behaves differently when capturing to Xsan. Final Cut Pro allows you to make a number of settings that ...
2006-06-28— Document No. 303953

Final Cut Pro will not open in Curtain Mode under Apple Remote ... ... while it is being controlled, effectively hiding the screen contents behind a "curtain."Final Cut Pro 5.1.2 cannot be ..
2006-10-18— Document No. 304564

Final Cut Pro: Edit To Tape via a PCI Express I/O card may drop frames with HD.
In some cases, Final Cut Pro will drop frames when ...
2006-06-03— Document No. 303815

Maximum memory usage in Final Cut Pro is 2.5 GB.
On a computer with more than 4 GB of RAM installed, you may notice that Final Cut ...
2006-10-03— Document No. 93844

Final Cut Pro: Apply the Broadcast Safe filter last.
Using the Broadcast Safe filter is a good way to ensure that the levels in your ...
2006-05-30— Document No. 303801

Final Cut Pro 5.1.2 won't open after installing Motion 2.1.
Final Cut Pro 5.1.2 won't open after installing Motion 2.1. If you install ...
2006-09-28— Document No. 304456

Final Cut Studio doesn't display or import Flash content after upgrading to QuickTime 7.1.3.
Issue or Symptom. You may be unable to ...
2006-09-26— Document No. 304445

Final Cut Pro: Read Prefetch settings for Xserve RAID.
If you are using an Apple Xserve RAID for video in high data rate formats ...
2006-05-30— Document No. 303809

How Final Cut Pro calculates Broadcast Wave File Time at a Video ..
... Although there are several de facto ways this information is stored, Final Cut Pro 5.1.2 does not support reading this information. ...
2006-10-27— Document No. 304660

Final Cut Pro: For best peformance on Mac Pro, install memory in risers symmetrically.
Final Cut Pro's performance benefits from ...
2006-10-04— Document No. 304492

Final Cut Pro: Troubleshooting Basics .
.. For further information on settings or installation, please refer to the Final Cut Pro documentation available on your...
2006-06-02— Document No. 302337

Final Cut Pro: Dropped Frames and Loss of Audio Sync
2006-01-13— Document No. 58640

Final Cut Pro: Send To Motion evokes QuickTime Player instead of ..
.. project in Motion. Instead, the .motn project opens in QuickTime Player. Products affected. Final Cut Pro 5. Solution. In the majority ...
2006-09-02— Document No. 304255

Motion project media goes offline in Final Cut Pro project
.. When you switch back to Final Cut Pro, the clip will display correctly. Products affected. Final Cut Pro 5; Motion 2; Final Cut Studio. ...
2006-01-17— Document No. 303143

Final Cut Pro 5: Color artifacts with the QuickTime > Sharpen filter
In Final Cut Pro 5.1, the QuickTime variant of the Sharpen ...
2006-04-07— Document No. 303559

Final Cut Pro 5.1.1: Updating older projects to address duplicated frames in P2 media ..
But the issue can still occur in Final Cut Pro 5.1.1 if the project contains 720p/24pn P2 media that was imported using an earlier version of Final Cut Pro 5. ...
2006-06-26— Document No. 303950

Final Cut Pro 5 may fail to open with 64 or more QuickTime components ...
Final Cut Pro 5.1.2. ... FCP Uncompressed 422.component; IMXCodec.component; LiveType.component; Motion ...
2006-10-16— Document No. 304477

Final Cut Pro: Timecode Error when capturing from Canon XL H1.
If you're using Final Cut Pro to capture media from a Canon XL H1 ...
2006-07-21— Document No. 304068

Final Cut Pro 5: "Unable to read the movie just captured"
If you're using a non-controllable device for audio-only capture in Final...
2006-06-03— Document No. 303811

Final Cut Pro: About the Blackmagic Gamma filter for Final Cut Pro
When using Final Cut Pro 5.x to open clips previously captured with DeckLink 4.x or older drivers, a gamma shift may be seen in the video in some cases...
2006-08-03— Document No. 304118

Final Cut Pro 5: Canceling render may take longer when rendering media with processor-intensive effects.
When Final Cut Pro is rendering ...
2006-10-23— Document No. 304570

Final Cut Pro 5: Unexpectedly quits after importing XDCAM Clips.
After importing a number of XDCAM clips into Final Cut Pro using ...
2006-07-19— Document No. 304033

Final Cut Pro 5: May drop frames of 1080pA24 media on 1.67GHz PowerBook G4 models.
Issue. While the PowerBook models that operate ...
2006-10-18— Document No. 304565

Final Cut Pro and Final Cut Express: Compatibility With Multiple ...
Learn compatibility information about Final Cut Pro and Final Cut...
Express do not work with a Macintosh Manager server environment
2006-05-24— Document No. 31365

Final Cut Pro 5: Use Quartz Extreme-capable video cards only.
You need a compatible computer with an AGP Quartz Extreme or PCI Express ...
2006-03-09— Document No. 303405

Final Cut Pro 5: Subclips may result from batch capture of 720p, 60 fps media.
If you're capturing 720p HD media at 60 frames per ...
2006-01-02 — Document No. 302917

Final Cut Pro 5: Upgrade Frequently Asked Questions.
What version of Final Cut Pro do I need to qualify for the Final Cut Pro 5 upgrade? ...
2005-05-06— Document No. 301549

Final Cut Pro 5: Connecting your DV camcorder or deck to your computer.
To capture video footage from a DV camcorder or deck into ...
2005-05-11— Document No. 301506

Final Cut Pro 5: About HDV and the Apple Intermediate Codec.
Final Cut Pro 5 features HDV video editing, making high definition video ...
2005-05-11— Document No. 301599

Final Cut Pro 5: Tips for using devices that handle both HDV and DV.
Many HDV cameras and decks are able to play and record DV as ...
2005-10-04— Document No. 302407

Final Cut Pro 5: Issues with setting an initial Scratch Disk.
The first time you open Final Cut Pro 5, a dialog opens, prompting -
2005-10-07— Document No. 302471

Final Cut Pro 5: Using the Send to Shake command...
To do this, select one or more clips in a Final Cut Pro 5 project, then choose File > Send to Shake. ...
2005-06-30— Document No. 301776

Final Cut Pro 5: Items to note when working with HDV.
Final Cut Pro 5: Computer and Camera show different points in time while capturing HDV. Notes...
2005-05-11— Document No. 301405

Final Cut Pro 5: Tips for using the Sony PDW-1500.
As mentioned in theFinal Cut Pro 5 List of Qualified Devices, Final Cut Pro 5...
2005-09-21— Document No. 302402

Final Cut Pro 5 : Capturing HDV creates new clips at scene breaks.
When you capture HDV footage, Final Cut Pro can automatically ...
2005-06-03— Document No. 301715

Final Cut Pro 5: Some media and effects cannot be exported to Shake.
Final Cut ... motion effects"); Filters attached to Final Cut Pro 5 clips. ...
2005-06-30— Document No. 301777

Before You Install Final Cut Pro 5.
This ... WARNING: The Final Cut Pro 5 Installer checks system requirements before installing. If...
2005-05-11— Document No. 301576

Final Cut Pro 5 and iMac G5 (iSight): Video from built-in camera is seen in Edit to Tape window.
If you're working in Final Cut Pro ...
2005-11-19— Document No. 302873

Final Cut Pro 5, Xsan: "Unable to set scratch disk" error on Xsan volume.
How you set the Final Cut Pro Scratch Disk on an Xsan volume ...
2005-05-11— Document No. 301197

Final Cut Pro 5: How to make the Timeline span across multiple displays.
In Final Cut Pro, you can arrange its windows any number ...
2005-06-20— Document No. 301785

Final Cut Pro 5: Computer and camera show different points in time while capturing HDV.
When you capture footage from an HDV (high...
2005-05-11— Document No. 301402

Final Cut Pro 5: About the Shift Fields filter.
Final Cut Pro 5 features a new filter called Shift Fields. You may have noticed that...
2005-06-10— Document No. 301753

Final Cut Pro 5: Uncompressed PAL setups have incorrect field dominance.
If you're working in PAL using either the Uncompressed 8...
2005-09-15— Document No. 302348

Final Cut Pro 5: If language is set to Japanese, duplicate Capture -
Presets if you can't capture video. If you're using Final Cut...
2005-08-31— Document No. 302159

Final Cut Pro 5: Timecode accuracy when using the Import Panasonic P2 function.
If you acquire clips via the Import Panasonic P2...
2005-11-10— Document No. 302787

Final Cut Pro 5: Unable to send to a Soundtrack Pro Audio File Project.
If you control-click an audio track with a linked clip in...
2005-11-14— Document No. 302805

If Final Cut Pro 5 won't open after you install it, be sure that you have QuickTime 7 installed...
2005-05-11— Document No. 301194

Audio from Final Cut Pro 5 goes offline after processing in SoundtrackPro.
Audio sent from Final Cut Pro 5 to the Soundtrack Pro...
2005-06-08— Document No. 301445

Final Cut Pro 5: About capturing down-converted DV from HDV source.
Final Cut Pro 5 supports capturing a number of different media...
2005-12-16— Document No. 302965

MPEG-2 export options in Final Cut Pro: Compressor and QuickTime
If you're familiar with earlier versions of Apple's video production software, and you're now working with
Final Cut Pro 5 and DVD Studio Pro 4, you might...
2005-08-19— Document No. 301871

Soundtrack Pro: Some elements are not included when sending a sequence or clip from Final Cut Pro 5.
When you send a sequence or...
2005-05-11— Document No. 301285

DVD Studio Pro 4: Updating rendered Final Cut Pro reference movies
... This applies to any reference movie that you import into DVD Studio Pro 4 from Final Cut Pro 4, Final Cut Pro HD, or Final Cut Pro 5...
2005-05-11— Document No. 301453

Final Cut Pro: Restoring a DV device connection in QuickTime 7
... you can do to resolve the issue. Important: Final Cut Pro 5 requires QuickTime 7.0 or later; it does not work with QuickTime 6...
2005-06-23— Document No. 301852

Final Cut Pro does not allow simultaneous editing of a project...
If you save a Final Cut Pro 5 project, stored on an Xsan 1.x volume, that was previously saved from another workstation during an editing session, you may...
2005-10-24— Document No. 302450

Final Cut Pro 5: About capturing down-converted DV from HDV source
Final Cut Pro 5 supports capturing a number of different media types using FireWire device control...
2005-12-16— Document No. 302965

Final Cut Pro 4.0 - 4.1.1: Device Compatibility Information.
This document lists device compatibility information intended to assist ...
2005-03-02— Document No. 300939

Personal tools