LAFCPUG: Effects FAQs

From FAQwiki

(Difference between revisions)
Jump to: navigation, search
(How do I light a Greenscreen?)
(Where can I get plug-ins for FCP?)
 
(27 intermediate revisions not shown)
Line 51: Line 51:
-
Here is a list of some useful plug-ins for FCP. This is not by any means a complete list, but it makes for a good starting point. Google ‘FCP Plug in’ for more results.  
+
Here is a list of some useful plug-ins for FCP. This is not by any means a complete list, but it makes for a good starting point. Google ‘FCP Plug in’ for more results. <br>
 +
*[http://www.noiseindustries.com/products/fxfactory/index.html FxFactory]
*[http://www.automaticduck.com Automatic Duck]
*[http://www.automaticduck.com Automatic Duck]
*[http://www.borisfx.com/ Boris FX]
*[http://www.borisfx.com/ Boris FX]
Line 64: Line 65:
*[http://homepage.mac.com/tomhenderson/beziermatte/ 50 Point Bezier Matte]  
*[http://homepage.mac.com/tomhenderson/beziermatte/ 50 Point Bezier Matte]  
*[http://www.joesfilters.com Joe's Filters]
*[http://www.joesfilters.com Joe's Filters]
-
*[http://www.kafwang.com/EUREKA/EurekaMain.html Eureka Plugins]
 
*[http://www.lyric.com/fcp-plugins/ Lyric Final Cut Plugins]
*[http://www.lyric.com/fcp-plugins/ Lyric Final Cut Plugins]
*[http://www.mattias.nu/ Too Much Too Soon Plugins]
*[http://www.mattias.nu/ Too Much Too Soon Plugins]
Line 76: Line 76:
*[http://www.synthetic-ap.com Synthetic Aperture]
*[http://www.synthetic-ap.com Synthetic Aperture]
*[http://www.trapcode.com/ Trapcode]
*[http://www.trapcode.com/ Trapcode]
 +
*[http://www.thegradingsweet.com/tgs2/COLOR%20GRADING.html The Grading Sweet]
 +
*[http://sheffieldsoftworks.com/ Sheffield Softworks]
Line 82: Line 84:
-
*[http://www.lafcpug.org/faqwiki/index.php?title=LAFCPUG:_Getting_Started_FAQs Back to Getting Started FAQs Contents]<br>
+
*[http://www.lafcpug.org/faqwiki/index.php?title=LAFCPUG:_Effects_FAQs Back to Effects FAQs Contents]<br>
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
Line 211: Line 213:
'''From Joel Peregrine:'''<br>  
'''From Joel Peregrine:'''<br>  
Highlight a clip, duplicate it and place it directly above itself in the same way your technique is set up. Set the V2 opacity at 50%. Now place the "de-interlace" filter (with the "LOWER" setting selected) on the V1 clip. Next, place "de-interlace" (with the "UPPER" setting selected) on the V2 clip. Thats it!!! No interlaced-induced flicker. Full resolution, No strobing, No jaggies, just a subtle, classy, non-video look.
Highlight a clip, duplicate it and place it directly above itself in the same way your technique is set up. Set the V2 opacity at 50%. Now place the "de-interlace" filter (with the "LOWER" setting selected) on the V1 clip. Next, place "de-interlace" (with the "UPPER" setting selected) on the V2 clip. Thats it!!! No interlaced-induced flicker. Full resolution, No strobing, No jaggies, just a subtle, classy, non-video look.
-
 
-
 
-
 
-
*[http://www.lafcpug.org/faqwiki/index.php?title=LAFCPUG:_Effects_FAQs Back to Effects FAQs Contents]<br>
 
-
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
 
-
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
 
-
 
-
 
-
----
 
-
 
-
==My effects/titles look awful==
 
-
 
-
'''From Jude Cotter'''
 
-
 
-
There are some fundamental differences between a computer monitor and a television monitor which mean that you cannot accurately judge the quality of things like titles, effects and colour on your computer once they have been prepared for television. For accuracy, you must use a properly calibrated external broadcast monitor. For a rough (non-professional) guide, you can use a TV set.
 
-
 
-
To connect an external monitor, you can use the output of your deck or camera (computer > firewire > deck / camera > external monitor), or a third party card.
 
-
 
-
 
-
'''Other things that could help''' :<br>
 
-
* You can also export a QuickTime movie, enable High Quality playback in the QuickTime Player and see it there. <br>
 
-
* Or export to tape and play this on a television to check that everything is OK.
 
-
 
-
 
-
'''Other things that it could be''' :<br>
 
-
* Make sure that your graphics are placed on whole numbers in the motion tab. <br>
 
-
* Don’t build your graphics too large. Massively reducing the size of graphics in FCP reduces the quality. Try to stay within two times the size of your format unless you have a special requirement for a big zoom in. <br>
 
-
* Make sure you are fully rendered in SAFE RT
 
-
 
-
 
-
Also read [http://www.kenstone.net/fcp_homepage/perfect_titles_phil.html "Great Titles with the DV Codec"] by '''Philip Hodgetts'''
 
Line 330: Line 301:
==How do I blur a face or an object like in Cops?==
==How do I blur a face or an object like in Cops?==
-
 
-
'''Q. How do I Blur a face or an object so I can hide its identity'''?
 
'''From Michael Horton'''<br>  
'''From Michael Horton'''<br>  
-
Most likely answer and one way to do it:<br>  
+
* Double click the clip to load it into the Viewer <br>
-
*1. Double click the clip to load it into the Viewer <br>
+
* Duplicate your clip on V2 by holding Option and Shift while you drag the clip upwards. This will produce a copy of the clip in perfect sync with the footage below it.<br>  
-
*2. Duplicate your clip on V2 by holding Option and Shift while you drag the clip upwards. This will produce a copy of the clip in perfect sync with the footage below it.<br>  
+
* Turn off the track visibility light on V1. (makes it easier to see your changes) <br>
-
*3. Turn off the track visibility light on V1. (makes it easier to see your changes) <br>
+
* Apply a mask shape filter to the clip on V2. (It's in Effects > Video Filters > Matte > Mask Shape) <br>
-
*4. Apply a mask shape filter to the clip on V2. (It's in Effects > Video Filters > Matte > Mask Shape) <br>
+
* Click the Filters tab at top of viewer. Scale your mask using the vertical and horizontal sliders to fit what you want to mask. You can move the mask shape anywhere on the clip by selecting the cross-hair button next to "Center." NOTE: if you are masking a face choose OVAL from the Shape pop-up button. <br>
-
*5. Click the Filters tab at top of viewer. Scale your mask using the vertical and horizontal sliders to fit what you want to mask. You can move the mask shape anywhere on the clip by selecting the cross-hair button next to "Center." <br>
+
* Apply a Gaussian blur filter to V2. (It's in Effects > Video Filters > Blur > Gaussian Blur.) Adjust the blur to suit your taste by using the Radius slider. <br>
-
NOTE: if you are masking a face choose OVAL from the Shape pop-up button. <br>
+
* Turn back on Track visibility light on V1. <br>
-
*6. Apply a Gaussian blur filter to V2. (It's in Effects > Video Filters > Blur > Gaussian Blur.) Adjust the blur to suit your taste by using the Radius slider. <br>
+
* Render <br>
-
*7. Turn back on Track visibility light on V1. <br>
 
-
*8. Render <br>
+
Here is a QT movie by '''Ripple Training''' that pretty much describes what is written above : [http://www.rippletraining.com/movies/Free%20Downloads/040301182627.mov COPS]
-
Here is a QT movie by Ripple Training that pretty much describes what is written above:
 
-
 
-
[http://www.rippletraining.com/movies/Free%20Downloads/040301182627.mov COPS]
 
-
----------------------------------------------------------------------------------------------------------------
 
'''But how do I mask and track a MOVING object?'''  
'''But how do I mask and track a MOVING object?'''  
   
   
 +
'''From Loren Miller'''<br>  
'''From Loren Miller'''<br>  
A Motion Tracker is best, but if you don't have it available, just use a Marker everytime the scene settles-- these instances are the most critical to blur-- and you can simply keyframe your blur mask shape to each marker location. Even if it zooms, mark major changes. Keyframing will interpolate the motion. It's rough and ready but it works.  
A Motion Tracker is best, but if you don't have it available, just use a Marker everytime the scene settles-- these instances are the most critical to blur-- and you can simply keyframe your blur mask shape to each marker location. Even if it zooms, mark major changes. Keyframing will interpolate the motion. It's rough and ready but it works.  
 +
Motion Trackers/Rotoscoping apps are best and ideal if your clip is long and the object is moving all over the place. Here are a few in no particular order:  
Motion Trackers/Rotoscoping apps are best and ideal if your clip is long and the object is moving all over the place. Here are a few in no particular order:  
-
*[http://www.apple.com/support/motion/ Motion] Hey, you bought it and you might as well use it. Has a nice motion tracking feature.<br>  
+
*[http://www.apple.com/support/motion/ Motion] Hey, you bought it and you might as well use it. Has a nice motion tracking feature.<br>  
*[http://www.borisfx.com/product/continuum/final_cut_pro/index.php Boris Continuum Complete] <br>
*[http://www.borisfx.com/product/continuum/final_cut_pro/index.php Boris Continuum Complete] <br>
Line 377: Line 343:
*[http://www.silhouettefx.com/roto/ Silhouette Roto]
*[http://www.silhouettefx.com/roto/ Silhouette Roto]
 +
 +
 +
'''From Jude Cotter'''
 +
 +
And here is a nice Motion 3 tutorial from '''Motion Smarts''' that shows you how to use the motion tracker. If you use a circle blur filter instead of the bulge filter applied in this clip, you'll get a good, fast, witness protection blur : [http://homepage.mac.com/specialcase/movies/Tracking_MatchMove1.mov Motion Tracking : Match Move and Track Parameter]
Line 383: Line 354:
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
 +
----
----
==How do I create a widescreen matte?==
==How do I create a widescreen matte?==
-
 
-
'''Q. How do I add a widescreen matte to my footage?'''
 
'''From Ben King''' <br>
'''From Ben King''' <br>
Line 395: Line 365:
Top Menu: Effects>Video Effects>Matte>Widescreen  
Top Menu: Effects>Video Effects>Matte>Widescreen  
Right or control click the nested sequence and open it in the viewer, select Filters tab and alter to 1.78:1  
Right or control click the nested sequence and open it in the viewer, select Filters tab and alter to 1.78:1  
 +
or  
or  
 +
'''From Derek Mok'''<br>  
'''From Derek Mok'''<br>  
-
Create a black Color Matte using Generator. Apply a Mask Shape filter (Effects - Video Filters - Matte - Mask Shape) to it, then use the following settings:<br>  
+
Create a black Color Matte using Generator. Apply a Mask Shape filter to it (Effects - Video Filters - Matte - Mask Shape), then use the following settings:<br>  
*Rectangular<br>  
*Rectangular<br>  
Line 408: Line 380:
Now rename the Color Matte to "1.85 Widescreen Matte" and drag it into your Browser. Put that on a video track above your clips and it will matte your whole sequence to around the equivalent of a 1.85 Widescreen Matte letterbox. To temporarily remove it to save rendering time, just select it and press CONTROL-B. It's a lot easier than putting on 100 Widescreen Matte filters, and much more convenient than nesting.  
Now rename the Color Matte to "1.85 Widescreen Matte" and drag it into your Browser. Put that on a video track above your clips and it will matte your whole sequence to around the equivalent of a 1.85 Widescreen Matte letterbox. To temporarily remove it to save rendering time, just select it and press CONTROL-B. It's a lot easier than putting on 100 Widescreen Matte filters, and much more convenient than nesting.  
 +
or  
or  
 +
'''From Jude Cotter'''<br>  
'''From Jude Cotter'''<br>  
Line 415: Line 389:
Use two identical colour mattes - one at the top and one at the bottom of the picture. Using this method means you can have different colours top and bottom if required.  
Use two identical colour mattes - one at the top and one at the bottom of the picture. Using this method means you can have different colours top and bottom if required.  
-
or
+
Or crop one clip top and bottom to suit, which will expose the back 'behind' the clip on the timeline, then copy the clip. Next, select the entire timeline (apple a) then use 'paste attributes' (option v) and tick the 'crop' box to apply the crop to all the selected clips in one hit.
-
Crop one clip top and bottom to suit, then copy the clip. Next, select the entire timeline (apple a) then use 'paste attributes' (option v) and tick the 'crop' box to apply the crop to all the selected clips in one hit.
 
-
and
+
or
 +
 
'''From Nick Meyers'''<br>  
'''From Nick Meyers'''<br>  
Line 425: Line 399:
If you create the same widescreen matte in Photoshop, rendering times are even shorter.  
If you create the same widescreen matte in Photoshop, rendering times are even shorter.  
-
Here's a way to create a wide screen mask in FCP:<br>
 
-
Lay up two slugs on V2 and V3, (one at the top of the screen and one at the bottom) then make the V1 clip invisible (select, and control b).
 
-
The screen will be black, of course, but you can check that it really is a wide screen mask by switching your canvas to checkerboard background. (no real need to do this, but it's re-assuring, and looks cool).  
+
Here's a way to create a wide screen mask in FCP. Lay up two slugs on V2 and V3, (one at the top of the screen and one at the bottom) then make the V1 clip invisible (select, and control b).  The screen will be black, of course, but you can check that it really is a wide screen mask by switching your canvas to checkerboard background. (no real need to do this, but it's re-assuring, and looks cool).  
 +
 
 +
 
 +
Now make a freeze frame of this. (Shift N), drag the freeze in to your browser. It's a widescreen mask!
-
Now make a freeze frame of this. (Shift N), drag the freeze in to your browser.<br>
 
-
It's a widescreen mask!
 
Once you've made the mask, you can set it to any duration you like just by entering a number in the viewer's duration field.
Once you've made the mask, you can set it to any duration you like just by entering a number in the viewer's duration field.
Line 441: Line 414:
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
-
----
 
-
 
-
==How do I make my 4:3 footage work in a 16:9 project?==
 
-
 
-
'''Q. I need to put some 4:3 footage in my widescreen project, but it comes out stretched. What can I do?'''
 
-
 
-
'''From Jude Cotter'''<br>
 
-
 
-
Here's a tutorial with several ideas for workarounds.<br>
 
-
[http://www.kenstone.net/fcp_homepage/faking_it.html Faking It : Making 4:3 footage work in 16:9 projects]
 
-
 
-
 
-
 
-
*[http://www.lafcpug.org/faqwiki/index.php?title=LAFCPUG:_Effects_FAQs Back to Effects FAQs Contents]<br>
 
-
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
 
-
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
 
----
----
Line 462: Line 419:
==How do make my video look like a cartoon?==
==How do make my video look like a cartoon?==
-
'''Q. I'd like to make my video look "cartoony" like those Charles Schwab commericals or the movie Scanner Darkly. How do I do that?'''  
+
'''From Michael Horton'''  
Lots of ways:<br>  
Lots of ways:<br>  
-
[http://www.synthetik.com/ Studio Artist]
+
* [http://www.synthetik.com/ Studio Artist]
-
 
+
* '''Ben Balzer''' posted a QT movie tutorial on how to do this using only FCP 5.1.2. You can find it here : [http://www.bbalser.com/samples/freedownloads/CartoonTutorial.mov Achieving a Quick and Easy Cartoon Look].  '''Nick Meyers''' adds : One thing I'd add to make it a little bit more "graphic" would be a strobe filter with strobe setting of 2 to make it look like it's animated on twos (2 frames shot of each image).
-
'''Ben Balzer''' posted a QT movie tutorial on how to do this using only FCP 5.1.2. You can find it HERE:<br>
+
-
[http://www.bbalser.com/samples/freedownloads/CartoonTutorial.mov Achieving a Quick and Easy Cartoon Look]
+
-
'''Nick Meyers''' added his thought to this tutorial.- <br>
 
-
"One thing I'd add to make it a little bit more "graphic" would be a strobe filter with strobe setting of 2 to make it look like it's animated on twos (2 frames shot of each image)
 
'''From Mike Watson'''<br>  
'''From Mike Watson'''<br>  
-
I did this with photoshop a few weeks ago, and then turned the image sequence  
+
I did this with photoshop a few weeks ago, and then turned the image sequence into a QT movie with QT-Pro. Certainly not the easiest way, but for a :30 commercial, it's only 900 frames -- just set up an action, and automate it.  
-
into a QT movie with QT-Pro. Certainly not the easiest way, but for a :30 commercial,  
+
-
it's only 900 frames -- just set up an action, and automate it.  
+
-
I followed this tutorial:<br>
+
I followed this tutorial : [http://www.macmerc.com/articles/Graphics_Tips/209 Comic Art Effect]  
-
[http://www.macmerc.com/articles/Graphics_Tips/209 Comic Art Effect]  
+
-
And then swiped this action: <br>
+
And then swiped this action: [http://www.macmerc.com/articles/Graphics_Tips/295 Adobe Photoshop Tip: Comic Art Effect -- Photoshop Action] and modified it pretty extensively.<br>
-
[http://www.macmerc.com/articles/Graphics_Tips/295 Adobe Photoshop Tip: Comic Art Effect -- Photoshop Action]  
+
-
And modified it pretty extensively.<br>
+
There is a setting in photoshop that will open one image, perform the action, save the image, and open the next image. I think mine only took a few hours. Perfecting the action took days. :-)
-
There is a setting in photoshop that will open one image, perform the action,
 
-
save the image, and open the next image. I think mine only took a few hours.
 
-
Perfecting the action took days. :-)
 
'''From Johan Polhem'''<br>  
'''From Johan Polhem'''<br>  
Line 504: Line 450:
*Render out. <br>
*Render out. <br>
-
'''Nick Meyers''' then added to Johan's idea. <br>
+
'''Nick Meyers''' then added to Johan's idea : If that's your bag (baby) then you may be interested in the [http://www.macupdate.com/info.php/id/16144/cheap-o-scope Cheap-o-Scope]  
-
If that's your bag (baby) then you may be interested in the [http://www.macupdate.com/info.php/id/16144/cheap-o-scope Cheap-o-Scope]  
+
 
 +
 
 +
There is also this tutorial from '''Steve Douglas''' : [http://www.kenstone.net/fcp_homepage/creating_cartoon_douglas.html Creating that Cartoon Effect]
 +
 
 +
 
 +
Also
-
There is also this tutorial from Steve Douglas<br>
 
-
[http://www.kenstone.net/fcp_homepage/creating_cartoon_douglas.html Creating that Cartoon Effect]
 
'''Some Plug-ins you might find helpful:'''<br>  
'''Some Plug-ins you might find helpful:'''<br>  
Line 519: Line 468:
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
 +
----
----
Line 530: Line 480:
*System Preferences>(Personal) International>Input Menu  
*System Preferences>(Personal) International>Input Menu  
-
*Then check the Character Palette On  
+
*Then check the Character Palette On. This should give you access to the Character Palette from the Flag in top right corner of the menu bar.  
-
 
+
-
This should give you access to the Character Palette from the Flag in top right corner of the menu bar.  
+
* Simply line up your cursor in the document you wish to add the character to  
* Simply line up your cursor in the document you wish to add the character to  
Line 538: Line 486:
*Open the character palette and double click the one you require. This should insert it into your document.  
*Open the character palette and double click the one you require. This should insert it into your document.  
-
You can access some accents via keystrokes too.
 
-
Please note that on some keyboards the option key is labeled 'alt'. On a Mac keyboard it's the key between the control key and the 'apple' key at the bottom left of the keyboard. If you can't find an option key on your keyboard, substitute the 'alt' key.  
+
You can access some accents via keystrokes too.
 +
'''Please note''' that on some keyboards the option key is labeled 'alt'. On a Mac keyboard it's the key between the control key and the 'apple' key at the bottom left of the keyboard. If you can't find an option key on your keyboard, substitute the 'alt' key.  
Some of the standard keystrokes for accents/characters are:  
Some of the standard keystrokes for accents/characters are:  
Line 573: Line 521:
*To get a ¿ (Spanish question mark) is option+shift+/  
*To get a ¿ (Spanish question mark) is option+shift+/  
*To get a © (copyright symbol) is option+g  
*To get a © (copyright symbol) is option+g  
 +
'''From Loren MIller'''<br>  
'''From Loren MIller'''<br>  
*Shift-Option-8 = degrees °  
*Shift-Option-8 = degrees °  
-
*Shift-Option-2 - Euro €  
+
*Shift-Option-2 - Euro € (at least in some fonts)  
-
*(at least in some fonts)  
+
 
'''From Jude Cotter'''<br>  
'''From Jude Cotter'''<br>  
Line 587: Line 536:
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
 +
----
----
-
==My effects/titles look terrible once they are on the timeline in Final Cut.==
+
==My effects/titles look terrible once they are on the timeline in Final Cut==
-
 
+
-
'''Q. My effects/titles look terrible once they are on the timeline in Final Cut. They look OK before this. Why?'''
+
'''From Jude Cotter'''  
'''From Jude Cotter'''  
-
 
-
*A. There are some fundamental differences between a computer monitor and a television monitor which mean that you cannot accurately judge the quality of things like titles, effects and colour on your computer once they have been prepared for television. For accuracy, you must use a properly calibrated external broadcast monitor. For a rough (non-professional) guide, you can use a TV set.
 
 +
There are some fundamental differences between a computer monitor and a television monitor which mean that you cannot accurately judge the quality of things like titles, effects and colour on your computer once they have been prepared for television. For accuracy, you must use a properly calibrated external broadcast monitor. For a rough (non-professional) guide, you can use a TV set.
 +
To connect an external monitor, you can use the output of your deck or camera (computer > firewire > deck / camera > external monitor), or a third party card.  
To connect an external monitor, you can use the output of your deck or camera (computer > firewire > deck / camera > external monitor), or a third party card.  
-
Other things that could help:<br>
 
-
*You can also export a QuickTime movie, enable High Quality playback in the QuickTime Player and see it there. <br>
 
-
*Or export to tape and play this on a television to check that everything is OK. <br>
 
-
Other things that it could be: <br>  
+
'''Other things that could help''' :<br>  
-
*Make sure that your graphics are placed on whole numbers in the motion tab. <br>  
+
* You can also export a QuickTime movie, enable High Quality playback in the QuickTime Player and see it there. <br>
-
*Don’t build your graphics too large. Massively reducing the size of graphics in FCP reduces the quality. Try to stay within two times the size of your format unless you have a special requirement for a big zoom in. <br>
+
* Or export to tape and play this on a television to check that everything is OK.  
-
*Make sure you are fully rendered in SAFE RT
+
-
Also read [http://www.kenstone.net/fcp_homepage/perfect_titles_phil.html "Great Titles with the DV Codec"] by Philip Hodgetts
+
 
 +
'''Other things that it could be''' :<br>
 +
* Make sure that your graphics are placed on whole numbers in the motion tab. <br>
 +
* Don’t build your graphics too large. Massively reducing the size of graphics in FCP reduces the quality. Try to stay within two times the size of your format unless you have a special requirement for a big zoom in. <br>
 +
* Make sure you are fully rendered in SAFE RT
 +
 
 +
 
 +
Also read [http://www.kenstone.net/fcp_homepage/perfect_titles_phil.html "Great Titles with the DV Codec"] by '''Philip Hodgetts'''
Line 616: Line 567:
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
 +
----
----
-
==BORIS : Filters not showing in FCP 5.1 and up==
+
==Boris Filters not showing in FCP 5.1 and up==
-
 
+
-
'''I just upgraded and now my Boris filters are missing in FCP, even though they are installed.'''
+
'''From Jude Cotter'''  
'''From Jude Cotter'''  
-
Some Boris products running on FCP 5.1 or OS X.4 (Tiger) require a patch from the Boris website. You can find them here  
+
Some Boris products running on FCP 5.1 or OS X.4 (Tiger) require a patch from the Boris website. You can find them here : [http://www.borisfx.com/updates/ Boris FX Updates]  
-
 
+
-
[http://www.borisfx.com/updates/ Boris FX Updates]  
+
The Boris CC patch has an additional step required to make the filters visible, and some caveats for use. This is from the Boris CC 5.1. patch readme file.  
The Boris CC patch has an additional step required to make the filters visible, and some caveats for use. This is from the Boris CC 5.1. patch readme file.  
 +
 +
Known Limitations  
Known Limitations  
Line 636: Line 586:
clip to which you are applying an effect.  
clip to which you are applying an effect.  
-
• The first time you launch FCP 5.1 after installing your Boris software, you must turn on
 
-
Caps Lock while you do so; then, quit FCP and relaunch it with Caps Lock turned off.
 
-
Otherwise, the filter windows will not appear. If you have already launched FCP 5.1 for
 
-
the first time with the Caps Lock key up, follow the instructions in the next section,
 
-
“Deleting the FCP Object Cache.”
 
-
If you apply a filter with the Filters tab open, you must have Caps Lock down and place  
+
* The first time you launch FCP 5.1 after installing your Boris software, you must turn on Caps Lock while you do so; then, quit FCP and relaunch it with Caps Lock turned off. Otherwise, the filter windows will not appear. If you have already launched FCP 5.1 for the first time with the Caps Lock key up, follow the instructions in the next section, “Deleting the FCP Object Cache.”
-
the CTI over the clip; otherwise the custom controls will be missing and Final Cut Pro  
+
* If you apply a filter with the Filters tab open, you must have Caps Lock down and place the CTI over the clip; otherwise the custom controls will be missing and Final Cut Pro may crash.  
-
may crash.  
+
-
If you apply an effect using the Final Cut Pro Effects menu, then delete the effect and  
+
* If you apply an effect using the Final Cut Pro Effects menu, then delete the effect and apply it to the same clip again, FCP crashes. Once you have deleted a Red effect, put the Caps Lock key down, and then reapply the effect; then resume work with the Caps Lock key up.  
-
apply it to the same clip again, FCP crashes. Once you have deleted a Red effect, put  
+
-
the Caps Lock key down, and then reapply the effect; then resume work with the Caps  
+
-
Lock key up.  
+
-
(Caps Lock key Down) When you double click a clip with a filter applied to it, FCP may  
+
* (Caps Lock key Down) When you double click a clip with a filter applied to it, FCP may crash if the Filters tab is open in the FCP Viewer. Keep the Caps Lock key up to prevent this problem.  
-
crash if the Filters tab is open in the FCP Viewer. Keep the Caps Lock key up to prevent  
+
-
this problem.  
+
-
(Caps Lock key Up) If you double click a clip with a filter applied, and the clip is not under  
+
* (Caps Lock key Up) If you double click a clip with a filter applied, and the clip is not under the CTI and the Filters tab is open in the FCP Viewer, the custom controls may be black. To resolve this problem, quit and relaunch FCP. To prevent the problem, move the CTI over the clip before double clicking.  
-
the CTI and the Filters tab is open in the FCP Viewer, the custom controls may be black.  
+
-
To resolve this problem, quit and relaunch FCP. To prevent the problem, move the CTI  
+
-
over the clip before double clicking.  
+
-
If you apply a filter, and the FCP Playhead is not on the clip that the filter is applied to,  
+
* If you apply a filter, and the FCP Playhead is not on the clip that the filter is applied to, the custom controls will be blank. To avoid this problem, first move the Playhead to the clip. Quitting FCP and relaunching will also resolve this problem. Note that once a particular effect is missing custom controls, further instances of that effect in a session will also be missing the custom controls.  
-
the custom controls will be blank. To avoid this problem, first move the Playhead to the  
+
-
clip. Quitting FCP and relaunching will also resolve this problem. Note that once a  
+
-
particular effect is missing custom controls, further instances of that effect in a session  
+
-
will also be missing the custom controls.  
+
-
If the Final Cut Pro Obj Cache and Final Cut Pro Prof Cache files are deleted or cleared,  
+
* If the Final Cut Pro Obj Cache and Final Cut Pro Prof Cache files are deleted or cleared, when a filter is added to a clip, its user interface will not appear. To resolve this problem, follow steps 3 and 4 in the next section, Deleting the FCP Caches.
-
when a filter is added to a clip, its user interface will not appear. To resolve this problem,  
+
 
-
follow steps 3 and 4 in the next section, Deleting the FCP Caches.  
+
* If you experience unexplained crashes, follow the instructions in the next section for Deleting the Final Cut Pro Obj Cache and Final Cut Pro Prof Cache files. Be sure to restart FCP twice, once with the Caps Lock key down, and then again with it up, as described in steps 3 and 4.  
-
• If you experience unexplained crashes, follow the instructions in the next section for
 
-
Deleting the Final Cut Pro Obj Cache and Final Cut Pro Prof Cache files. Be sure to
 
-
restart FCP twice, once with the Caps Lock key down, and then again with it up, as
 
-
described in steps 3 and 4.
 
Keep an eye on the Boris website.
Keep an eye on the Boris website.
Line 683: Line 611:
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
-
----
 
-
 
-
==Where can I get plug-ins for FCP?==
 
-
 
-
Here is a list of some useful plug-in pages. This is not a complete list, but a good starting point. Google ‘FCP Plug in’ for more results.
 
-
 
-
'''From Jude Cotter'''<br>
 
-
*http://www.automaticduck.com
 
-
*http://www.borisfx.com/
 
-
*http://www.buena.com/
 
-
*http://www.cgm-online.com/eiperle/cgm_e.html
 
-
*http://www.chv-plugins.com/index.html
 
-
*http://www.digitalfilmtools.com/index2.htm
 
-
*http://www.digital-heaven.co.uk/
 
-
*http://www.dvgarage.com/
 
-
*http://www.fxscript.org
 
-
*http://www.genarts.com/download-sapphire-ae-mac.html
 
-
*http://homepage.mac.com/tomhenderson/beziermatte/
 
-
*http://www.joesfilters.com
 
-
*http://www.kafwang.com/EUREKA/EurekaMain.html
 
-
*http://www.lyric.com/fcp-plugins/
 
-
*http://www.mattias.nu/
 
-
*http://www.nattress.com
 
-
*http://www.petewarden.com/index.htm
 
-
*http://www.pistolerapost.com/tech/2strip.html
 
-
*http://www.pluginz.com/default.php?from=rlist&genre=6&category=62&type=2
 
-
*http://www.redgiantsoftware.com/
 
-
*http://www.revisionfx.com/
 
-
*http://www.riverrockstudios.com/riverrock/pages/FCP.html
 
-
*http://www.synthetic-ap.com
 
-
*http://www.trapcode.com/
 
-
 
-
Also check [http://www.digitalzoo.com.au/lunchtime/lunch_docs/related_02_free.htm Simon Kirbys Lunchtime Cinema] which has links to FREE FCP Plugins.
 
-
 
-
 
-
 
-
*[http://www.lafcpug.org/faqwiki/index.php?title=LAFCPUG:_Effects_FAQs Back to Effects FAQs Contents]<br>
 
-
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
 
-
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
 
----
----
-
==What codec handles Alpha Channels?==
+
==Is there a codec that handles Alpha Channels without the need to render?==
-
 
+
-
'''Is there a codec that handles an Alpha Channel so I don't have to render every time I bring it into the timeline?'''
+
-
 
+
-
Probable answers:
+
'''From Joe Morelli:'''<br>  
'''From Joe Morelli:'''<br>  
No (not software only). Maybe with a specific Capture Card, like Kona or Black Magic might have a built-in key accelerator, but a (software) codec by itself will need to be rendered.  
No (not software only). Maybe with a specific Capture Card, like Kona or Black Magic might have a built-in key accelerator, but a (software) codec by itself will need to be rendered.  
 +
'''From Kevin Monahan:'''<br>  
'''From Kevin Monahan:'''<br>  
I have found that a PICT with Alpha will play in real time. Stills only, though.  
I have found that a PICT with Alpha will play in real time. Stills only, though.  
 +
'''From Robert Monaghan''' <br>  
'''From Robert Monaghan''' <br>  
DPX from Glue Tools can handle alpha channels  
DPX from Glue Tools can handle alpha channels  
 +
'''From Frank Jonen''' <br>
'''From Frank Jonen''' <br>
-
- JPEG 2000  
+
* JPEG 2000  
-
- Animation
+
* Animation
Line 749: Line 637:
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
 +
----
----
==My footage is underexposed==
==My footage is underexposed==
-
 
-
'''Q. I have some footage which is underexposed. Some things in the frame are almost black. How can I fix this?'''
 
'''From Jude Cotter'''<br>  
'''From Jude Cotter'''<br>  
-
A. There are a number of things you can do to improve the brightness of your picture. You can use the three way colour corrector to adjust your blacks, mids and whites, you can use the gamma correction filter, or the brightness and contrast filter, or the levels filter and so on.  
+
 
 +
There are a number of things you can do to improve the brightness of your picture. You can use the three way colour corrector to adjust your blacks, mids and whites, you can use the gamma correction filter, or the brightness and contrast filter, or the levels filter and so on.  
 +
 
Most of these methods will introduce some grain if your footage is very dark. One way around this is to select the clip, hold option and shift and drag the clip upwards to V2. This makes an exact copy and keeps it in perfect sync with the dark clip on V1.  
Most of these methods will introduce some grain if your footage is very dark. One way around this is to select the clip, hold option and shift and drag the clip upwards to V2. This makes an exact copy and keeps it in perfect sync with the dark clip on V1.  
 +
Then select the clip on V2 and right click or control click it to access a small popup menu. In this menu, select composite mode > Add, Screen or Overlay. If this makes your image too bright, reduce the opacity of the V2 clip. If the clip is still too dark, repeat the procedure on V3 and so on as required.  
Then select the clip on V2 and right click or control click it to access a small popup menu. In this menu, select composite mode > Add, Screen or Overlay. If this makes your image too bright, reduce the opacity of the V2 clip. If the clip is still too dark, repeat the procedure on V3 and so on as required.  
 +
An important thing to note is that computer monitors do not give accurate representations of the gamma and chroma levels of video. The picture in FCP on a computer monitor is quite a bit darker than your picture will appear on a television, so be sure to check your work on a broadcast monitor before making adjustments to brightness or colour.
An important thing to note is that computer monitors do not give accurate representations of the gamma and chroma levels of video. The picture in FCP on a computer monitor is quite a bit darker than your picture will appear on a television, so be sure to check your work on a broadcast monitor before making adjustments to brightness or colour.
<br>
<br>
 +
 +
 +
'''From Strypes'''<br>
 +
 +
Aside from the built-in FCP 3-way Color Corrector, there's also a fabulous (and free) FCP plug-in from Lyric Media. Great for lifting those shadows, especially if you just want that extra bit of control in bringing back some of the details in the darker spots without affecting the overall image.
 +
 +
Check this out:
 +
http://www.lyric.com/fcp-plugins/index.htm
 +
Line 770: Line 670:
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
 +
----
----
==My footage is overexposed==
==My footage is overexposed==
-
 
-
Q. I have some footage which is overexposed. Some things in the frame are completely white. How can I fix this?
 
'''From Jude Cotter'''<br>  
'''From Jude Cotter'''<br>  
-
A. It’s probable that your footage is unsalvagable. Overexposed DV is very difficult to work with. Having said that, here are some things that may help a bit.  
+
 
 +
It’s possible that your footage is unsalvageable. Overexposed DV is very difficult to work with. Having said that, here are some things that may help a bit.  
*Add a ‘Gamma Correction’ filter and try increasing the gamma. Keep in mind that everything in the frame will get darker, unless you use a mask on a copy on a separate layer.  
*Add a ‘Gamma Correction’ filter and try increasing the gamma. Keep in mind that everything in the frame will get darker, unless you use a mask on a copy on a separate layer.  
Line 784: Line 684:
*Investigate the Three Way Colour Correction tool. Using the 'Limit Effects' section (which is in a menu exposed by clicking the small black triangle at the bottom left of the 3 way colour corrector) you can make a mask that includes everything at a single, or several close luminances, and therefore just work with this part of the picture. Check your manual for instructions, or, if you are keen, buy an instructional book or DVD on Colour Correction in FCP.
*Investigate the Three Way Colour Correction tool. Using the 'Limit Effects' section (which is in a menu exposed by clicking the small black triangle at the bottom left of the 3 way colour corrector) you can make a mask that includes everything at a single, or several close luminances, and therefore just work with this part of the picture. Check your manual for instructions, or, if you are keen, buy an instructional book or DVD on Colour Correction in FCP.
<br>
<br>
 +
 +
'''From Strypes'''<br>
 +
 +
Pistolera has a plug-in (that's free too), called the Captain's Blowout Fixer. It takes the information from either the Red, Green or Blue channel and uses it in the channel that is clipped. Very useful.
 +
 +
http://pistolerapost.com/pluginz/index.html
Line 789: Line 695:
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
 +
----
----
==How do I color correct my clips?==
==How do I color correct my clips?==
-
 
-
'''How do I color correct my clips?'''
 
'''From Nick Meyers'''  
'''From Nick Meyers'''  
-
Nick's short course on colour corecting:  
+
Nick's short course on colour correcting:  
It's easy. Just like your hi-fi amp at home has bass and treble knobs, for adjusting different parts on the sound, the FCP colour corrector has Controls for BLACKS, MIDS, and HIGHS.  
It's easy. Just like your hi-fi amp at home has bass and treble knobs, for adjusting different parts on the sound, the FCP colour corrector has Controls for BLACKS, MIDS, and HIGHS.  
-
If the colour is WAY off, use the eye droppers next to each colour wheel to "normalize": the blacks, grays, and whites.<br>
 
-
I find I might only use the eyedropper on the blacks, then save the other colours for later, unless they are way off. <br>
 
-
In general, though DON'T mess with the colours first. Adjust the levels first; that's the sliders under the colour wheels. <br>
+
If the colour is WAY off, use the eye droppers next to each colour wheel to "normalize" the blacks, grays, and whites. I find I might only use the eyedropper on the blacks, then save the other colours for later, unless they are way off. In general, though DON'T mess with the colours first. Adjust the levels first; that's the sliders under the colour wheels. I do blacks first. I like a good dynamic range to the levels, with the blacks black and the whites bright. But that's just me, and  
-
I do blacks first. <br>
+
that's just a look I like. <br>
-
I like a good dynamic range to the levels, with the blacks black and the whites bright. But that's just me, and that's just a look I like. <br>
+
-
Pull the slider one way, then another. <br>
+
-
See how it affects the DARK areas of the shot, just like the Bass knob on your amp affects the LOW tones in the music. <br>
+
-
I then do the whites and mids, or sometimes the mids and whites. <br>
+
-
I have the range check on in the canvas so I can see if I need to pull the whites down a bit (red zebra and exclamation point in canvas) <br>
+
-
Play with these levels, and see what effect they have.
 
-
Once I'm happy with the levels, and the dynamic range of the brightness/contrast I attack the colours. <br>
+
Pull the slider one way, then another. See how it affects the DARK areas of the shot, just like the Bass knob on your amp affects the LOW tones in the music. I then do the whites and mids, or sometimes the mids and whites. I have the range check on in the canvas so I can see if I need to pull the whites down a bit (red zebra and exclamation point in canvas). Play with these levels, and see what effect they have.
-
Again VERY SIMPLE. <br>
+
 
-
I generaly start with the mids (especialy if I eye-dropered the blacks) <br>
+
 
-
Look at the colours. You want more RED, drag the button in the middle of the wheel towards RED. <br>
+
Once I'm happy with the levels, and the dynamic range of the brightness/contrast I attack the colours. Again VERY SIMPLE. I generaly start with the mids (especialy if I eye-dropered the blacks). Look at the colours. You want more RED, drag the button in the middle of the wheel towards RED. If you want Less RED drag it away from RED. See, simple. Tip: hold down the Apple or Command key when dragging these buttons, otherwise they will move tooooo slooooow <br>
-
If you want Less RED drag it away from RED. <br>
+
 
-
See, simple. <br>
+
 
 +
See the little line in the orange area of the wheel? Thats a good place to aim for to warm up skin tones, especially with DV footage. <br>
-
(Tip: hold down the Apple or Command key when dragging these buttons, otherwise they will move tooooo slooooow) <br>
 
-
See the little line in the orange area of the wheel? <br>
 
-
Thats a good place to aim for to warm up skin tones, especially with DV footage. <br>
 
Look at the blacks.. can you see a bit of blue (for instance) in there? Find the similar blue tone in the black's wheel and pull the button away from it. <br>
Look at the blacks.. can you see a bit of blue (for instance) in there? Find the similar blue tone in the black's wheel and pull the button away from it. <br>
 +
Also see: <br>
Also see: <br>
Line 841: Line 737:
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
 +
 +
 +
----
 +
 +
==How do I create Typewriter Text==
 +
 +
'''From Tom Wolsky'''
 +
 +
Use Title 3D and animate the type on function. Scroll down in the controls and you'll see Type. Keyframe the values from 0 to 100. It will type on between the keyframed areas then then sit there for the rest of the text block, however long you make it in the timeline.
 +
 +
 +
*[http://www.lafcpug.org/faqwiki/index.php?title=LAFCPUG:_Effects_FAQs Back to Effects FAQs Contents]<br>
 +
*[http://www.lafcpug.org/faqwiki/index.php/Main_Page Back to Index of FAQs]<br>
 +
*[http://www.lafcpug.org/ Back to lafcpug.org]<br>
 +
----
----

Latest revision as of 20:55, 11 March 2012

LAFCPUG LOGO
Effects FAQs


Contents

How do I get good slow motion?

Probable answers:

A. From Kevin Monahan:
You can get good quality slow motion using the Twixtor Plug-in from Re:Vision in FCP or After Effects. You can do both variable and constant speed effects and the quality is much higher than you see in the stock speed tools in FCP.


B. From Nick Meyers:
I've got a "poor-man's" smooth slo-mo that i do in FCP. It really only works with 50% speed, but here it is:

Slow clip to 50%. Double the clip up on itself. Add de-interlace to both layers. Set one to upper, the other to lower. Add the blink filter to the V2 clip, Set to 1 frame on, 1 frame off.

You do need to render a small section and see if you have the right field order, and that can change if you trim the clip.


C. From Graeme Nattress:
You can use Compressor or Shake for their optical flow to get great slomo, similar to Shake. Or if you just need a nice 50% slowmo from interlaced video, my G Map Frames plugin does that well and fast..


D. From Jude Cotter:
Update : Since the release of Motion 3, Final Cut Studio users now have access to the Optical Flow technology originated in Shake. This can give excellent results and is easy to apply. For more information, go to Final Cut Studio 2 Tutorials. A 'Tracking' tutorial is first, followed by the Retiming tutorial.




Where can I get plug-ins for FCP?

From Jude Cotter


Here is a list of some useful plug-ins for FCP. This is not by any means a complete list, but it makes for a good starting point. Google ‘FCP Plug in’ for more results.


Also check Simon Kirbys Lunchtime Cinema which has links to FREE FCP Plugins




How to fake a camera flash

From Jude Cotter

The quick, simple and free way is to use a 'dip to colour' dissolve. Once you have applied the default transition to your cut, double click the transition in the timeline to load it into the viewer.


Now change the parameters to 6 frames, and the colour to almost white. It's best not to use absolute white with video. Also, think about adding a sound effect such as a camera click, as this will help 'sell' the effect.


Other things that might help

You can also download a free 'flash frame' plug-in as part of the Too Much Too Soon donationware pack here : Too Much Too Soon

For a more controllable effect, you can buy the Nattress Film Effects set which includes 'G Film Flash' here : Nattress Effects


From Loren Miller:
Determine what *kind* of camera flash. Older bulb-type flashes take longer and 6 frames is about right. Think RAGING BULL. Newer strobe-type digital flashes are shorter. Think CSI. Each flash starts very bright and ramps down in a millisecond as bulb energy fades.


A method using simply FCP:

  • Blade out frames for flash effect so your filter won't affect surrounding action. You could even peel this section up above by dragging with Option held. Then remove the blading from the clip below.
  • Apply Brightness/Contrast filter effect (to the dupe if you've done this).
  • Open the section in Viewer.
  • Step in and ramp one or both settngs from full to half strength.
  • Experiment against the particular action background for best effect-- include a fade UP frame if it adds authenticity.
  • Sound effect is always critical to a good flash.




Can I do black and white, while one thing stays in colour?

From Jude Cotter
This is known as the 'Pleasantville' effect, after the movie 'Pleasantville' which gradually introduced colour over the course of the film. There is an excellent tutorial by Darrin Sayewich for reproducing this effect in FCP here : How to create the 'Pleasantville' effect in Final Cut Pro




How do I create gunshot muzzle flashes?

From Michael Horton

WARNING: These are easily overblown and badly implemented.


There are two general methods:

1. Simple flashes in FCP using native effects.

First, determine the length of the muzzle flash. For a handgun in daylight, it'll be short, 3-5 frames. Longer at night, 5-7 frames. For an automatic weapon in daylight, try short bursts, 3 frames, repeated as a series for the length of the discharge. Lay down the audio spot effect as a good effect guide.

  • Choose the frame as finger pulls trigger for the effect start and Blade it.
  • Choose the final frame of the flash to end, and Blade it.
  • Duplicate the bladed section to just above the original track.
  • Create the flash mask : apply a 4-point Garbage Mask.
  • Cluster all 4 points in around front of the muzzle. Pay attention to pointing vector.
  • Create an "ice cream cone" diamond shape with the thick part at the muzzle.
  • Apply Brightness/Contrast filter to the bladed flash section. Crank up settings to taste.
  • Crank up the edge feather.
  • Adjust to taste, render, review.

Optional - Orange color balance adjustment to flash, especially for nighttime/dim scenes.


2. Canned weapon effects.

Such as the ones at Detonation Films: Excellent FCP-specific tutorial and free flashes.




How do I make my video look like film?

From Jude Cotter
The fast and easy way is to get Nattress' 'Film Effects' filter set. The price is excellent, and the package works extremely well. You can find it here : Nattress Film Effects

Also take a look at The 'Magic Bullet' suite by Red Giant Software


Other things that might help :

There is a simple method for producing a 'filmish' look in FCP. While it obviously is not as convincing as any of the products already mentioned, it does come in at the great price of free, for the no-budget filmmaker.

  • Duplicate your clip on V2 by holding option and shift while you drag the clip upwards. This will produce a copy of the clip in perfect sync with the footage below it.
  • Apply a gaussian blur filter to the clip on V2. Push this effect up quite high, so that everything looks very blurry.
  • Right click or control click the V2 clip and from the small popup menu, choose composite mode > Soft light, or Overlay.
  • Reduce the opacity of the V2 clip until it is barely visible, and only the soft 'wash' effect remains.


If you want to add dust and scratches, select your clips using In and Out on the timeline, and then go File > Export > Using Quicktime Conversion > Format - Quicktime Movie > Options > Filter > Special Effects > Film Noise. Pull all the options down low so they aren't too cheesy. There is also the option to change the colour in this menu as well - Faded Film or Faded 1930s, etc.

You can also add grain in the generator menu - Render > Particle Noise with a good blur on it often works well.

or

From Joel Peregrine:
Highlight a clip, duplicate it and place it directly above itself in the same way your technique is set up. Set the V2 opacity at 50%. Now place the "de-interlace" filter (with the "LOWER" setting selected) on the V1 clip. Next, place "de-interlace" (with the "UPPER" setting selected) on the V2 clip. Thats it!!! No interlaced-induced flicker. Full resolution, No strobing, No jaggies, just a subtle, classy, non-video look.




How do I make a telephone voice?

From Ian Graham

The Telephone voice officially goes from about 180 Hz to 3200Hz. I use 300 to 3K. Roll off everything else and then tilt the piece in the middle to favor the highs. Add long-distance hissing noises or other disturbances as appropriate.


Use Low shelf. Roll off at 350, at a -6 to start. High shelf at 3500 at -6. Then find a source of hiss and crackle. I use a two minute section of phono record I recorded years ago, needle just running the inside groove.


Also


Ripple Training has a good tutorial : Playing telephone with Final Cut Pro's band pass filter


There is also this tutorial on FCP Producer : Telephone Voice Sound Effect




How do I make a clip play in reverse?

From Jim Perry
Right click or control-click the clip and select "speed...", then click the "reverse" box.




Changing clip speed without changing duration

From Michael Horton

Match Frame is your friend. Read Ken Stone's tutorial here : How To Get The Most Out Of Match Frame

Don't like to read? Then watch Martin Baker's video podcast at : Top Tips : Clip Speed (at the bottom of the list)

Or this one from Ripple Training : Final Cut Pro - Speed Changes with Match Frame




How do I light a Greenscreen?

From Joey "grafixjoe" Morelli:

joey_greenscreen.jpg


Also read this excellent tutorial by Jonas Hummelstrand on how to shoot, light and work with your talent in front of a blue or green screen : Greenscreen and Bluescreen Checklist




How do I blur a face or an object like in Cops?

From Michael Horton

  • Double click the clip to load it into the Viewer
  • Duplicate your clip on V2 by holding Option and Shift while you drag the clip upwards. This will produce a copy of the clip in perfect sync with the footage below it.
  • Turn off the track visibility light on V1. (makes it easier to see your changes)
  • Apply a mask shape filter to the clip on V2. (It's in Effects > Video Filters > Matte > Mask Shape)
  • Click the Filters tab at top of viewer. Scale your mask using the vertical and horizontal sliders to fit what you want to mask. You can move the mask shape anywhere on the clip by selecting the cross-hair button next to "Center." NOTE: if you are masking a face choose OVAL from the Shape pop-up button.
  • Apply a Gaussian blur filter to V2. (It's in Effects > Video Filters > Blur > Gaussian Blur.) Adjust the blur to suit your taste by using the Radius slider.
  • Turn back on Track visibility light on V1.
  • Render


Here is a QT movie by Ripple Training that pretty much describes what is written above : COPS


But how do I mask and track a MOVING object?


From Loren Miller

A Motion Tracker is best, but if you don't have it available, just use a Marker everytime the scene settles-- these instances are the most critical to blur-- and you can simply keyframe your blur mask shape to each marker location. Even if it zooms, mark major changes. Keyframing will interpolate the motion. It's rough and ready but it works.


Motion Trackers/Rotoscoping apps are best and ideal if your clip is long and the object is moving all over the place. Here are a few in no particular order:

  • Motion Hey, you bought it and you might as well use it. Has a nice motion tracking feature.


From Jude Cotter

And here is a nice Motion 3 tutorial from Motion Smarts that shows you how to use the motion tracker. If you use a circle blur filter instead of the bulge filter applied in this clip, you'll get a good, fast, witness protection blur : Motion Tracking : Match Move and Track Parameter




How do I create a widescreen matte?

From Ben King

Create a new sequence and drop your timeline into that and apply the widescreen mask. Top Menu: Effects>Video Effects>Matte>Widescreen Right or control click the nested sequence and open it in the viewer, select Filters tab and alter to 1.78:1


or


From Derek Mok

Create a black Color Matte using Generator. Apply a Mask Shape filter to it (Effects - Video Filters - Matte - Mask Shape), then use the following settings:

  • Rectangular
  • Horizontal 100
  • Vertical [Variable] (If I remember right, 80 will give you a 1.66:1 matte, 75.2 will give you 1.78:1, 72 will give you 1.85:1)
  • Invert CHECKED

Now rename the Color Matte to "1.85 Widescreen Matte" and drag it into your Browser. Put that on a video track above your clips and it will matte your whole sequence to around the equivalent of a 1.85 Widescreen Matte letterbox. To temporarily remove it to save rendering time, just select it and press CONTROL-B. It's a lot easier than putting on 100 Widescreen Matte filters, and much more convenient than nesting.


or


From Jude Cotter

Use two identical colour mattes - one at the top and one at the bottom of the picture. Using this method means you can have different colours top and bottom if required.

Or crop one clip top and bottom to suit, which will expose the back 'behind' the clip on the timeline, then copy the clip. Next, select the entire timeline (apple a) then use 'paste attributes' (option v) and tick the 'crop' box to apply the crop to all the selected clips in one hit.


or


From Nick Meyers

If you create the same widescreen matte in Photoshop, rendering times are even shorter.


Here's a way to create a wide screen mask in FCP. Lay up two slugs on V2 and V3, (one at the top of the screen and one at the bottom) then make the V1 clip invisible (select, and control b). The screen will be black, of course, but you can check that it really is a wide screen mask by switching your canvas to checkerboard background. (no real need to do this, but it's re-assuring, and looks cool).


Now make a freeze frame of this. (Shift N), drag the freeze in to your browser. It's a widescreen mask!


Once you've made the mask, you can set it to any duration you like just by entering a number in the viewer's duration field.




How do make my video look like a cartoon?

From Michael Horton

Lots of ways:

  • Studio Artist
  • Ben Balzer posted a QT movie tutorial on how to do this using only FCP 5.1.2. You can find it here : Achieving a Quick and Easy Cartoon Look. Nick Meyers adds : One thing I'd add to make it a little bit more "graphic" would be a strobe filter with strobe setting of 2 to make it look like it's animated on twos (2 frames shot of each image).


From Mike Watson

I did this with photoshop a few weeks ago, and then turned the image sequence into a QT movie with QT-Pro. Certainly not the easiest way, but for a :30 commercial, it's only 900 frames -- just set up an action, and automate it.

I followed this tutorial : Comic Art Effect

And then swiped this action: Adobe Photoshop Tip: Comic Art Effect -- Photoshop Action and modified it pretty extensively.

There is a setting in photoshop that will open one image, perform the action, save the image, and open the next image. I think mine only took a few hours. Perfecting the action took days. :-)


From Johan Polhem
Best and easiest way to get good results:

  • Import footage into After Effects.
  • Export as Filmstrip.
  • Open in photoshop.
  • Apply filters. (Many many different combos to chosse from)
  • Tweak individual frames if necessary.
  • Save.
  • Import to After Effects.
  • Render out.

Nick Meyers then added to Johan's idea : If that's your bag (baby) then you may be interested in the Cheap-o-Scope


There is also this tutorial from Steve Douglas : Creating that Cartoon Effect


Also


Some Plug-ins you might find helpful:
Graphic Novel Look
ToonIt




How do I get symbols, accents & international characters?

From Ben King

If you want specific characters and/or accents go into:

  • System Preferences>(Personal) International>Input Menu
  • Then check the Character Palette On. This should give you access to the Character Palette from the Flag in top right corner of the menu bar.
  • Simply line up your cursor in the document you wish to add the character to
  • Open the character palette and double click the one you require. This should insert it into your document.


You can access some accents via keystrokes too. Please note that on some keyboards the option key is labeled 'alt'. On a Mac keyboard it's the key between the control key and the 'apple' key at the bottom left of the keyboard. If you can't find an option key on your keyboard, substitute the 'alt' key.

Some of the standard keystrokes for accents/characters are:

  • To get an Acute Accent ´ is option+e then the letter eg: á é í ó ú
  • To get a Grave Accent ` is option+~(tilde key) eg: à è ì ò ù
  • To get an Umlaut or Dieresis ¨ is option+u then the letter eg: ä ë ï ö ü
  • To get a Circumflex ^ is option+i the the letter eg: â ê î ô û
  • To get a Tilde over letters ~ is option+n the the letter eg: ã õ
  • To get a cedilla ç is option+c
  • To get ø is option+o
  • To get ß is option+s
  • To get © is option+g
  • To get ® is option+r
  • To get å is option+a
  • To get a ™ is option+2


From Derek Mok:

  • To get a ¡ (Spanish exclamation) is option+1
  • To get a ¿ (Spanish question mark) is option+shift+/
  • To get a © (copyright symbol) is option+g


From Loren MIller

  • Shift-Option-8 = degrees °
  • Shift-Option-2 - Euro € (at least in some fonts)


From Jude Cotter
To get the apple symbol for tutorials, choose a standard Apple font like helvetica and then use option + shift + k




My effects/titles look terrible once they are on the timeline in Final Cut

From Jude Cotter

There are some fundamental differences between a computer monitor and a television monitor which mean that you cannot accurately judge the quality of things like titles, effects and colour on your computer once they have been prepared for television. For accuracy, you must use a properly calibrated external broadcast monitor. For a rough (non-professional) guide, you can use a TV set.

To connect an external monitor, you can use the output of your deck or camera (computer > firewire > deck / camera > external monitor), or a third party card.


Other things that could help :

  • You can also export a QuickTime movie, enable High Quality playback in the QuickTime Player and see it there.
  • Or export to tape and play this on a television to check that everything is OK.


Other things that it could be :

  • Make sure that your graphics are placed on whole numbers in the motion tab.
  • Don’t build your graphics too large. Massively reducing the size of graphics in FCP reduces the quality. Try to stay within two times the size of your format unless you have a special requirement for a big zoom in.
  • Make sure you are fully rendered in SAFE RT


Also read "Great Titles with the DV Codec" by Philip Hodgetts




Boris Filters not showing in FCP 5.1 and up

From Jude Cotter

Some Boris products running on FCP 5.1 or OS X.4 (Tiger) require a patch from the Boris website. You can find them here : Boris FX Updates

The Boris CC patch has an additional step required to make the filters visible, and some caveats for use. This is from the Boris CC 5.1. patch readme file.


Known Limitations

This software patch includes the following limitations. The engineers at Boris FX are working closely with the Final Cut Pro Engineering team to resolve the issues listed in this section. In the meantime, we recommend that you save your work often, and place the CTI over any clip to which you are applying an effect.


  • The first time you launch FCP 5.1 after installing your Boris software, you must turn on Caps Lock while you do so; then, quit FCP and relaunch it with Caps Lock turned off. Otherwise, the filter windows will not appear. If you have already launched FCP 5.1 for the first time with the Caps Lock key up, follow the instructions in the next section, “Deleting the FCP Object Cache.”
  • If you apply a filter with the Filters tab open, you must have Caps Lock down and place the CTI over the clip; otherwise the custom controls will be missing and Final Cut Pro may crash.
  • If you apply an effect using the Final Cut Pro Effects menu, then delete the effect and apply it to the same clip again, FCP crashes. Once you have deleted a Red effect, put the Caps Lock key down, and then reapply the effect; then resume work with the Caps Lock key up.
  • (Caps Lock key Down) When you double click a clip with a filter applied to it, FCP may crash if the Filters tab is open in the FCP Viewer. Keep the Caps Lock key up to prevent this problem.
  • (Caps Lock key Up) If you double click a clip with a filter applied, and the clip is not under the CTI and the Filters tab is open in the FCP Viewer, the custom controls may be black. To resolve this problem, quit and relaunch FCP. To prevent the problem, move the CTI over the clip before double clicking.
  • If you apply a filter, and the FCP Playhead is not on the clip that the filter is applied to, the custom controls will be blank. To avoid this problem, first move the Playhead to the clip. Quitting FCP and relaunching will also resolve this problem. Note that once a particular effect is missing custom controls, further instances of that effect in a session will also be missing the custom controls.
  • If the Final Cut Pro Obj Cache and Final Cut Pro Prof Cache files are deleted or cleared, when a filter is added to a clip, its user interface will not appear. To resolve this problem, follow steps 3 and 4 in the next section, Deleting the FCP Caches.
  • If you experience unexplained crashes, follow the instructions in the next section for Deleting the Final Cut Pro Obj Cache and Final Cut Pro Prof Cache files. Be sure to restart FCP twice, once with the Caps Lock key down, and then again with it up, as described in steps 3 and 4.


Keep an eye on the Boris website.




Is there a codec that handles Alpha Channels without the need to render?

From Joe Morelli:
No (not software only). Maybe with a specific Capture Card, like Kona or Black Magic might have a built-in key accelerator, but a (software) codec by itself will need to be rendered.


From Kevin Monahan:
I have found that a PICT with Alpha will play in real time. Stills only, though.


From Robert Monaghan
DPX from Glue Tools can handle alpha channels


From Frank Jonen

  • JPEG 2000
  • Animation




My footage is underexposed

From Jude Cotter

There are a number of things you can do to improve the brightness of your picture. You can use the three way colour corrector to adjust your blacks, mids and whites, you can use the gamma correction filter, or the brightness and contrast filter, or the levels filter and so on.


Most of these methods will introduce some grain if your footage is very dark. One way around this is to select the clip, hold option and shift and drag the clip upwards to V2. This makes an exact copy and keeps it in perfect sync with the dark clip on V1.


Then select the clip on V2 and right click or control click it to access a small popup menu. In this menu, select composite mode > Add, Screen or Overlay. If this makes your image too bright, reduce the opacity of the V2 clip. If the clip is still too dark, repeat the procedure on V3 and so on as required.


An important thing to note is that computer monitors do not give accurate representations of the gamma and chroma levels of video. The picture in FCP on a computer monitor is quite a bit darker than your picture will appear on a television, so be sure to check your work on a broadcast monitor before making adjustments to brightness or colour.


From Strypes

Aside from the built-in FCP 3-way Color Corrector, there's also a fabulous (and free) FCP plug-in from Lyric Media. Great for lifting those shadows, especially if you just want that extra bit of control in bringing back some of the details in the darker spots without affecting the overall image.

Check this out: http://www.lyric.com/fcp-plugins/index.htm




My footage is overexposed

From Jude Cotter

It’s possible that your footage is unsalvageable. Overexposed DV is very difficult to work with. Having said that, here are some things that may help a bit.

  • Add a ‘Gamma Correction’ filter and try increasing the gamma. Keep in mind that everything in the frame will get darker, unless you use a mask on a copy on a separate layer.
  • Investigate the Three Way Colour Correction tool. Using the 'Limit Effects' section (which is in a menu exposed by clicking the small black triangle at the bottom left of the 3 way colour corrector) you can make a mask that includes everything at a single, or several close luminances, and therefore just work with this part of the picture. Check your manual for instructions, or, if you are keen, buy an instructional book or DVD on Colour Correction in FCP.


From Strypes

Pistolera has a plug-in (that's free too), called the Captain's Blowout Fixer. It takes the information from either the Red, Green or Blue channel and uses it in the channel that is clipped. Very useful.

http://pistolerapost.com/pluginz/index.html




How do I color correct my clips?

From Nick Meyers

Nick's short course on colour correcting:

It's easy. Just like your hi-fi amp at home has bass and treble knobs, for adjusting different parts on the sound, the FCP colour corrector has Controls for BLACKS, MIDS, and HIGHS.


If the colour is WAY off, use the eye droppers next to each colour wheel to "normalize" the blacks, grays, and whites. I find I might only use the eyedropper on the blacks, then save the other colours for later, unless they are way off. In general, though DON'T mess with the colours first. Adjust the levels first; that's the sliders under the colour wheels. I do blacks first. I like a good dynamic range to the levels, with the blacks black and the whites bright. But that's just me, and that's just a look I like.


Pull the slider one way, then another. See how it affects the DARK areas of the shot, just like the Bass knob on your amp affects the LOW tones in the music. I then do the whites and mids, or sometimes the mids and whites. I have the range check on in the canvas so I can see if I need to pull the whites down a bit (red zebra and exclamation point in canvas). Play with these levels, and see what effect they have.


Once I'm happy with the levels, and the dynamic range of the brightness/contrast I attack the colours. Again VERY SIMPLE. I generaly start with the mids (especialy if I eye-dropered the blacks). Look at the colours. You want more RED, drag the button in the middle of the wheel towards RED. If you want Less RED drag it away from RED. See, simple. Tip: hold down the Apple or Command key when dragging these buttons, otherwise they will move tooooo slooooow


See the little line in the orange area of the wheel? Thats a good place to aim for to warm up skin tones, especially with DV footage.


Look at the blacks.. can you see a bit of blue (for instance) in there? Find the similar blue tone in the black's wheel and pull the button away from it.


Also see:

Color Balancing using Match Hue

Using Match Hue in FCP 5

Color Correction in FCP Training DVD




How do I create Typewriter Text

From Tom Wolsky

Use Title 3D and animate the type on function. Scroll down in the controls and you'll see Type. Keyframe the values from 0 to 100. It will type on between the keyframed areas then then sit there for the rest of the text block, however long you make it in the timeline.




Personal tools