Multiplexing problems using Vela

Hi Guys and Gals and all in between I am on a plane and a client needs some help can anyone have a suggestion for him thanks
Current problem is:
This is an HD Final Cut Pro file, there are Multiplexing problems in the Transport Stream as analyzed by Vela. The Video Multiplexer buffer overflows and the audio elementary and transport buffers overflow. Any advice to tweak the settings to keep these buffers from overflowing would help greatly.

Also hear is some more info


File location is:
[209.251.144.2]




I have uploaded the test file.

lsracom30.m2t

Below are the settings that were used to compress.

Let me know what you find.


Thanks!


Carolyn



Name: Transport Stream
Description: MPEG-2 Transport Stream with MPEG audio at 48 kHz. Settings
based off the source resolution and frame-rate.
File Extension: m2t
Estimated file size: 55.79 MB
Type: MPEG-2 transport stream
Video Encoder
Format: M2V
Width and Height: Automatic
Selected: 1280 x 720
Pixel aspect ratio: Square
Crop: None
Padding: None
Frame rate: (100% of source)
Selected: 59.94
Frame Controls: Automatically selected: Off
Start timecode from source
Aspect ratio: Automatic
Selected 16:9
Field dominance: Automatic:
Selected Progressive
Average data rate: 15 (Mbps)
2 Pass VBR enabled
Maximum data rate: 20 (Mbps)
High quality
Best motion estimation
Closed GOP Size: 15, Structure: IBBP
Audio Encoder
Format: MPEG
Sample Rate: 48.000kHz
Channels: 2
Bits Per Sample: 16

Sincerely,

Jeffrey Stansfield
President
Video Engineer
P.O. Box 17331
Encino, CA 91416
818-624-4242 Cell
818-342-3725 Office Only in evenings
818-342-3725 Fax
[www.advantagevideosystems.com]
Jeff@advantagevideosystems.com