|
ok so last we all talked, I was coming up with the basics of the room, and hoping that it would happen.
We got the word the other day that another department is purchasing a dvc pro Hd deck and hd monitor to set up into a lab we design! so here's what we are going for mac pro 3.0 ghz of processing power 8 gigs of ram (purchased separately) 500 gig hd set up an ide drive in the second optical port for the boot (sent this way from apple) and we would build a 2tb sata raid internally ati radeon X1900 kona 3 card w/ breakout box (currently 2765 w/ tax/shipping) so that?s all set, but what we are trying to look at is a full set of scopes waveform, vector scope. The question is we can't spend on a whole lot on them, and we were wondering if a standard def set of scopes will work with hd, or if there is some other sort of compromise that can be made -Aaron
Standard Def scopes will not work with HD footage. You will need HD scopes which run between $4k and $18k. Or, you can get Final Touch HD for $4k and use the software scopes from that, which are spot on. I hear that FCP has fixed their internal software scopes, but it bears some testing on how they deal with HD. The current ones miss a lot, and required me to do a bit of workarounding (is that a word?).
An HD monitor isn't cheap either. $4k for lower end LCD which might be "decent" to $17k for good reliable LCD, then to $10k-$35k for CRT monitors. www.shanerosseditor.com Listen to THE EDIT BAY Podcast on iTunes [itunes.apple.com]
Sorry, only registered users may post in this forum.
|
|