EDL Film project 24@25

Hello.

I am editing a project shoot on 35mm 24f/s
To work in final cut we did a conformed version on cinema tools
wich is called 24@25.
The question is: do we have to reverse this material back in 25f/s?

If I understand it wright, to cut the negative I must do a cinema tools film list
otherwise, with an edl I do not have the key-codes but only time-code...

Thanks a lot
I hope that does not sound like a total lost cutter

a

Quote
alexandrina
I hope that does not sound like a total lost cutter

a little bit
but 24@25 is like that, so join the club.

Quote

to cut the negative I must do a cinema tools film list
otherwise, with an edl I do not have the key-codes but only time-code...

this really depends on your neg matcher.
some don't want a cut list,
they will make their own from an EDL.

talk to your neg matcher, tell them your workflow,
and see what they ask for.

however, to create an accurate EDL you do have to set your clips and sequnces to the TC Rate of 24@25.
for what it's worth, you can do this after you have edited everything (if for some reason you forgot to set it originally).
pull up the TC Rate column in the browser to check.


hope that clears thing up a little,
nick

thanks a lot nick,

I am allways totaly afraid when material has to go out from the computer
there must be something wich goes wrong...
hope it will work

thanks
alexandra