I get freezes or hangs or stalls with about 1/2 of my long captures from 32k DV, shot on a VX 1000 and an XL-1. Can't see any pattern yet. Happens whether I capture to a FW drive or internal ATA, Stereo 1,2 or Stereo 3,4. I'm using a DSR 11 and a TRV11, on a Dul 1GB.
There are no TC breaks or audio gaps that i know of in any of these tapes. Doesn't happen in FCP 3.0.2 in OS 9, with same material.
I Batch captured one clip with the TC in at 0.10.00 and the out marked at 1.01.59.00, on a one hour miniDV tape. It froze at the end of the capture, where the screen says Completing capture" at the bottom.
Moved the Out point to shorten the capture by a little over 1 min, so the TC out was under 1 min, at 59.59.00 and it captured fine. But then i doubt if it is that simple, since I also have the same problem with captures that are 45 mins long, with no TC values rolling over the 1 hour mark.
So who knows. The clip is actually captured and saved OK, it just doesn't have any TC or reel number. I can import it and give it TC and a reel, and i guess it's OK. Don't know if it might be missing other meta-data that will bite me in yje rear, though, when i media manage.
--Ralph