Anyone? Help!
I read the issues with the other user in the forum who also had my setup.
The knowns:
MAC HD has ample empty space. No where near 90% full.
Using a new LaCie 160GB external HD on an 800 Firewire (tried 400 too)
The only way I get connectivity in Log and Capture is once I have unplugged the external HD from the G5. I have same issue if using other external HDs both LaCie and others. A sony digital camcorder has no issues with any of the hard drives.
I get the hanging up program ("spinning beach ball of death"
issue until I turn off the camera - then FCPHD will completely load or close or whatever I am awaiting.
I cannot eject an external HD if the GL2 is on VTR mode either. The eject hangs up until I turn the GL2 off.
I am only able to function normally when I have no external HDs connected, but just the GL2 to the G5 via Firewire 400 (4pin at cam, 6 pin at G5). Under this workaround I can capture to the internal MAC HD and then must disconnect GL2 (or turn off), connect an external HD and transfer from internal HD to external. Efficiency Cop say, "No Bueno".
Any clues I might try?
Oh, this occurs without difference under both Firewire NTSC and Firewire NTSC Basic setups.
Any help will be MUCH appreciated.
Greg