|
Show all posts by userYour basic troubleshooting forum for all things FCP Legacy (FCP 7 and below.) And general discussion on topics that do not fit in the other forums.
Not registered? Click HERE to register now transfer r3d to prores 444 problem - 11 years agoHello I am trying to log and transfer r3d clips, red one at 4k, in FCP7 . The clips at 444 show a lot of noise in FCP in the canvas, it I export the sequence as quick time movie with present settings I get black video. Only if I transfer the r3d clips to 422 HQ everything is ok. why can´t I transfer to 444? I am using Imac intel from 2008, i upgraded to 4Gb of ram best regardsby maltess2 - Café LA Re: FC log and transfer window does not recognize rd3 clips, code is installed - 11 years agook, but is the Ram why I am getting a low quality image in 444?by maltess2 - Café LA Re: FC log and transfer window does not recognize rd3 clips, code is installed - 11 years agoWhat I did, I created a folder mamed MAG 1 with th clips inside and now FC recognize them. The problem is the quelity is wafull, I am transfering to 444 and I gue a clip full of something like noise, it has the same size than the original red clip but awfull quelity. anyone had this issue or may know what happening? I have transfer to 422 hq and works, I get the clean image , but when the curby maltess2 - Café LA FC log and transfer window does not recognize rd3 clips, code is installed - 11 years agoHello, I am triying to log and transfer clips fpr the first time but the log and transfer window dont recognze them, the is no sign of opening the clips in the window. I have the red ce installes and I select apple priress 444 before but nothing I read in the red cde manuel that it needs 2gb of ram to work, I only have one, could this be the problem? I am using an intel Imac . I was able to iby maltess2 - Café LA Re: process to import red one footage using EDL - 11 years agoSo far I tried to log and transfer one of the r3d clips with the log and transfer window in 444. I got a very bad quality and small clip in 444, the original is 80gb and this is 2 gb, so something wrong is happening. Mayve final cut log and transfer window is actually not recognizing the r3d and is transfering one of the proxys, could this be possible?by maltess2 - Café LA Re: process to import red one footage using EDL - 11 years agoCan I use the media manager to recompress the 422 clip to the r3d at 444, I mean can I use it as a log and transfer alternative?by maltess2 - Café LA Re: process to import red one footage using EDL - 11 years agoYes, I have done the editing with proress 422, 1280. Now I want the same editing with the R3D clips in instead. The 422 clips in the time line have the same name than the r3d clips so I can recognize them , that is now my only option, I would like to transfer and import just the edited piece of the clipby maltess2 - Café LA Re: process to import red one footage using EDL - 11 years agoNo, I havent done anything so far. I noted that in the EDL clips, they have the option to reconnect media, but I cant get that straight from the clip right? I guess I have to log and transfer. What would be the process to do all this?by maltess2 - Café LA process to import red one footage using EDL - 11 years agoHello I have a project mainly shoot with red at 4K and some canon 5D. I have FCP and Imac. The red footage were transfered to proress 422 at 1280, a friend told me this way I could go more easily trough the material in order to make a first editing. Than create an EDL and import the original red footage Red footage is 2:35 . What I am doing now is just a trailer of the project, I have finisby maltess2 - Café LA Importing Red One clips to edit over a preview with prores 422 - 11 years agoHello Here is the situation I been shooting a project with a Red One at 4K. I dont have a Mac Pro, I have an Imac. A friend with a Mac pro transfer the 4K clips to prores 422 (HQ) so I can edit with FC and Imac and later export an EDL and get 4K files. Righ now I just want to edit a teaser . Can I do this with my Imac? I mean, Can I import the 4 K clips over the editing for the teaser Iby maltess2 - Café LA Re: syncing multiple audo and video tracks - 11 years agoThanks, Plual eyes seemed to work for most of the partsby maltess2 - Café LA syncing multiple audo and video tracks - 11 years agoHello, I have 3 cameras for wedding video. Can I somehow sync these 3? one of the cameras is shoooting all the time, but the other two are not, so its diffcult for me to do this by the eye Best regardsby maltess2 - Café LA Re: 5D and 7D clips problems in the time line - 11 years agoThanks, I dont seem to have the cinematools app installed. In the meantime, can I edit the 7D clips in the time line and comform the clips from the browser? I mean , are the clips in the time line going to be 24fps after that or I have to edit from the beginning at 24fps? cheersby maltess2 - Café LA Re: 5D and 7D clips problems in the time line - 11 years agoOK, I would keep the 5D material because I already started to edit that. 5D is 23,97. So I would like to convert the 7D 25fps. What would be the process and what software I need to use? I am unexperienced, sorry I dont quite understand the export , comform and import explanation. By exporting you mean the final output of the project from FC . So I have to convert the 7D material and import thby maltess2 - Café LA Re: 5D and 7D clips problems in the time line - 11 years agoOk, thanks, so ...you mean I have to choose one camera or the other? I can´t use both cameras? no way to fix this? what a terrible mistake if that´s the case. I did render a bit in final cut and I get a blue lineby maltess2 - Café LA Re: 5D and 7D clips problems in the time line - 11 years agoThanks! In the item properties 7D is: vidrate 25fps, 1920x1080. 5D is : vidrate 23,98fps 1920x1080. audio is the same in both what should i do now? is this difference in vidrate the problem?by maltess2 - Café LA 5D and 7D clips problems in the time line - 11 years agoHello, I wan to edit a diveo with 5D ad 7D clips. I did the log and transfer process to prores 422. I drag 5D clips into the timeline, than when I put the 7D clips, I get a render green line. The same if I put the 7D clips first, then I get the green line fo 5D clips. I was suggestad in another forum that 5D could be 25p and 7D could be 30P or different. But I did check sequence setting and tby maltess2 - Café LA Going back to editing and choosing FCP7 vs. X to for REd One and Sony F3 - 12 years agoHello to all, I been using FCP 5.14 in the past , I was working with DVC pro 50 only. Now I have to edit a Red one project and a Sony F3 project I have been away from editing and video for almost two years so I am not familiar with new formats and FCP, please give me some tips to start with all this, I guess I have to update FCP to X or 7 1. I am still working in one project in FCP 5.1by maltess2 - Café LA trouble opening P2 108025p in FCP - 12 years agoHello guys I am triying to open some P2 files in FCP. Some of them are 720 25p and FCP recongnizes tham, the rest is 1080 25p, the files are in ten computar as mov files, but neither FC or quicktime are not recognizing them, I opoen a sequence for this in DVCPRO HD 1080 24p, DVCPRO hd720 24p for the 720 files and they are working fine On the other hand, is the lack of no DVCPROHD 25 p settiby maltess2 - Café LA Proper settings for creating Mp4 quality file - 13 years agoHello, I have a project in FC, the original video file is quicktime . I wan to show this in Vimeo but if I export in quicktime the size is about 300mb, I think this is too much for Vimeo and people can have problems watching the file, am I wrong with this? I have seen that videos at Vimeo with the same duration at mine are usally Mp4 and only 20 mb. How can I create ths, because I been triying tby maltess2 - Café LA Re: working with MP4 clips in FC - 13 years ago-Convert them to a good editing-friendly intermediate codec for editing, such as ProRes. I am triying to install this, but the system tells me I already have a newer version installes. I am downloading the latest version in the apple support site, and I dont recall installing this in the past at all, could I been having some sort of trouble here? Yes, sorry I was talking about size. I haveby maltess2 - Café LA working with MP4 clips in FC - 13 years agoHello to everyne I am trying to edit four different videos in MP4 with FC. 5.14 version. Each one of these videos come in different aspect ratios, I adjusted the sequence setting to match this, so now I have 4 diferent FC projects, each one with different aspect ratios. First problem is: I can open the Mp4 videos in the time line with no problem, they need to be render. I want the edby maltess2 - Café LA working with a smaller size ratio than the usual for FC - 13 years agoHello to everyone I want to edit some videos that originally have a smaller size than the FC canvas. I mean, when I open this videos there is a lot of black space around in the canvas, so I can change the aspect ratio and make it bigger to cover the whole canvas, but then I guess I am loosing quality when I export the project to any format. Is there anyway I can work with this videos withouby maltess2 - Café LA Problems to create DVD - 13 years agoHello To everyone I am triying to create a DVD with IDVD, but I get a flickering image. The original file is a quick time movie exported from FC, this movie dos not flicker at all when I play it in quicktime player Thanks a lot and best regardsby maltess2 - DVD Studio Pro Problems with a quicktime movie file to create DVD - 13 years agoHello to everyone I exported a quicktime file in 16:9 and made a DVD using IDVD with 16:9 settings. When I play this back in the computer I get a 4:3 lecture with black spaces right and left, I f I play back in a DVD player and a TV I get the 16:9 picture, is this normal? it never happened to me before The second problem is that I get a noticeable flickering in the image when I playback theby maltess2 - Café LA |
|