|
Mostrar todos los mensajes por usuarioSu foro de soluciones a problemas básicos de FCP y programas relacionados.
near 2 hours - 16 años antesOk, near 2 hours in idvd was a problem, now dvdstudiopro is giving me headaches too. Export from FCP3 a FCPmovie, 1h50min. When going to dvdstudiopro, starts encoding, and after so long it says not enough space. I tried "one pass", tried "one pass vbr" min=4mbps max=7mbps, still not enough space, even tough the disk meter says 4.6g or 4.8g. The only way was to do a MPEGpor johnnyhmn - DVD Studio Pro Re: DVD pixelation - 16 años antesG4 dual 867, fcp3.0.4, 512 ram (better more I know), 10.4.8, doing evrything from internal drive, enough free space. Pixelation occurs at the beginning, middle, end, just anywhere. Yes, I have chapters markers. Many other projects same lenght or even near 2 hours, never had any problem. Video in FCP looks fine, the problem is when encoding. I did a disk image in idvd6 then Toast8: same probpor johnnyhmn - DVD Studio Pro Re: Very helpful guys! - 16 años antesThanks John. I have been checking about this everywhere, dvd forums, apple forum, even Ken Stone is now helping me. Any more ideas always welcome. Johnnypor johnnyhmn - DVD Studio Pro Very helpful guys! - 16 años antesIn the past I have had many kind and helpful advices. Appreciate this! This time about "DVD Pixelation" (Ag. 3) just John answered. I would really appreciate some more inputs. I'm sure someone must now some more about this problem. Please be so kind to read about it and advise. Thanks! Johnnypor johnnyhmn - DVD Studio Pro Re: DVD pixelation - 16 años antesI'm just trying all the possibilities Derek. I stop the H264, it was forever, doing nothing. Any suggestions to fix this pixelation problem Derek? Would installing idvd again, or going up to 10.4.10 fix this maybe? How about buying an external burner? Thanks! Johnnypor johnnyhmn - DVD Studio Pro Re: DVD pixelation - 16 años antesI tried Toast8 already, same bad results. Reading from Apple forum, I see doing a QTmovie-H264 solved a similiar problem, I'm trying that, but is taking like 30 hours to do the 1h45min project. Will let you know John. Johnnypor johnnyhmn - DVD Studio Pro Re: DVD pixelation - 16 años antesJohn, I always use "Best Quality" in idvd. About what scene: It is a party, so there is some cam movement, not much motion, little dark sometimes, nothing that bad, I did a couple of these before, with no problems. Now, I just got only the spots where I saw pixelation, put them in a new movie, burned, and there is no problem at all. But, if I burn the whole 1h45min. I'm afraid thepor johnnyhmn - DVD Studio Pro Re: DVD pixelation - 16 años antesI burned other projects with no problem. I got this problem only with 2 projects that I did yesterday. Since the first time I burned these 2, I got pixelation. They both look good when I play them in FCP, the problem is with the burned dvd. The guys who gave me these, said they reuse their minidv tapes. Could it be defective tapes? I have burned same project 3 times and pixelation is alpor johnnyhmn - DVD Studio Pro Re: DV pixelation - 16 años antesSorry, subject sould be: "DVD pixelation" Johnnypor johnnyhmn - DVD Studio Pro DV pixelation - 16 años antesHi, G4, 10.4.8, FCP3.0.4 I have been burning projects with no problems until yesterday that I got some pixelation in my dvd. Made another copy: pixelation in the same spots. Changed dvd brand: same pixelation. I cleaned the lens and haven't changed anything in FCP settings, checked in different dvd players even in my G4, pixelation is there. I had 10.4.9, but because problems with FCP3por johnnyhmn - DVD Studio Pro Re: FCP3 capture freezing - 16 años antesYou'r right Scott, 3.0.4. I never had any capture problems before, until I went to 10.4.9 But I went back to 10.4.6, and no problems, I'm gonna try 10.4.8 Johnnypor johnnyhmn - Café LA Sobre FCP3 - 16 años antesSólo por si acaso alguien se encuentre en la misma situación. Aunque vivo en Atlanta, sigo en el pasado con FCP3, G4. Al actualizar a 10.4.9, cuando capturaba se frizaba por un momento y seguía. Con recomendaciones de algunos genios de CAFE LA, lo pudo arreglar. La mejor solución, la de apple, bajar a 10.4.8. Hay algún problemita con FCP antiguos y 10.4.9. La otra solución era metpor johnnyhmn - Foro FinalCutPro Re: FCP3 capture freezing - 16 años antesMichael: I have the latest version 3.0.2. Shane: I tried apple's solution, it worked very well. I continue with 512ram, no problems so far. Thanks everyone! Johnnypor johnnyhmn - Café LA FCP3 capture freezing - 16 años antes(I know, upgrade!. but no money now, please). I installed 10.4.9 and when capturing (from GL-2), it freezes sometimes and then continues. I found a topic on this, but with FCP4, anyway I followed their recomendations, no luck yet. I'm gonna try going back to 10.4.8. Any suggestions, please. G4,dual867,512ram, FCP3, 10.4.9 Thank you friends! Johnnypor johnnyhmn - Café LA Re: Toast8? - 17 años antesGracias Vicente. No tengo DVD Studio Pro, sólo iDVD6. Leí lo de hacer un pre-mpeg2 y en el foro en Inglés alguien sugirió bajar a 3.5mbs bit rate. Voy a probar todo. Gracias! Johnnypor johnnyhmn - Foro FinalCutPro Toast8? - 17 años antesHola, tengo 2h20min.(29.54GB) en FCP3 (G4, dual 867, tiger) yendo a DVD. Con iDVD6 puedo quemar hasta 2hs., compré Toast8 Titanium que puede grabar hasta 2.5hs. Cuando intento, dice "7.5 GB needed and only 4.3 in dvd", parece que está comprimiendo pero no suficiente. Entonces no se trata de horas, sino de GBs? Traté "low res" FCP = about same GBs Usando Compressopor johnnyhmn - Foro FinalCutPro Toast8? - 17 años antesHi, I have 2h20min (29.54GB) in FCP3 (G4, dual 867, tiger) going to DVD. With iDVD6 I can fit 2hs. only, so I bought Toast8 Titanium and read you can fit up to 2.5hs. When trying this, it says like 7.5 GB needed and only 4.3 in dvd, so i assume it is compressing, but not enough. Is not actually about hours, but about GBs? when toast says 2.5 hours, i thought 2h20min would fit, but didn't wpor johnnyhmn - Café LA Re: DVD to FCP - 17 años antesYes, I use Fix Timecode Breaks. Sometimes it shows like a line of audio only, and from 1 hour captures parts of 10-15 seconds, 20min, etc. not the whole video. The only problem with MiniDV recorder is price! haven't found cheap ones. Thanks! Johnnypor johnnyhmn - Café LA DVD to FCP - 17 años antesHi, At church we record from 2 JVC5000 thru Videonics to DVD. I use Streamclip (w/ Mpeg2 Component) to capture DVD, but many times it doesn't capture everything, just part of the dvd, many parts missing. I think the old dvd burner could have some problems also, but someone recomended DVDxDV. Do you think dvdxdv would be a better option, or maybe dvdxdv Pro? (not much $$$) I am thinking ofpor johnnyhmn - Café LA Grabación en DVD? - 17 años antesHola, necesito consejos. Tenemos en la iglesia 2 JVC5000, y grabamos en un DVD burner por ahora. Sería esta la mejor calidad para grabar? No quisiera grabar en las 2 cams o comprar MiniDV recorder (No $$$). El problema es que no siempre podemos copiar bien los DVD para FCP3. (Tengo Streamclip y MPEG-2 Component) A veces no puedo copiar todos los chapters, solo uno o dos. Cada vez qupor johnnyhmn - Foro FinalCutPro Re: iTunes erased - 17 años antesAppreciate very much your answers guys. Thanks! Johnnypor johnnyhmn - Café LA Re: iTunes erased - 17 años antesYes, and did empty trash. Now when I open itunes it says that the originals can not be found. Johnnypor johnnyhmn - Café LA iTunes erased - 17 años antesCan someone please help me? I erased by accident all my music from iTunes library. How can I recover all that please! Any software? Thanks! Johnnypor johnnyhmn - Café LA Re: Problemas con Tiger - 17 años antesEn realidad no es una venta no autorizada. Sigo haciendo algunos trabajos para ellos. Aprecio tu consejo, Al. Johnnypor johnnyhmn - Foro FinalCutPro Re: Problemas con Tiger - 17 años antesAclaración: Nosotros lo compramos allá, ahora sólo quiero tener una copia para mí, si esto es posible. Johnnypor johnnyhmn - Foro FinalCutPro |
|