|
Forum List
>
Café LA
>
Topic
Capturing Limited 2 Approx. 5minsPosted by unity media services
I have a strange problem. My FCP program will capture but it freeze frames after about five minutes and continues to capture audio with the freeze frame. I have tried changing the capture settings, I have tried non-controlled, I have tried analog only thru a digital convertor, I have tried capturing in a different project, I have tried capturing to a different drive, and I have rebooted twice. I can still only capture around 5 minutes before it freeze frames and captures only audio. The problem has to be software right?
Any help anyone can give is appreciated.
Sounds like you need to check the amount of space available on your capture scratch drive to me. Also, if you are using firewire to an external drive, make sure you are using an 800 cable or esata [400 is too slow]. If you don't have a 800 firewire, capture little sections to your internal HD and see if that helps. That way you can rule out the easy set up being the problem...
Also, check out the "limit capture now" setting... even tho thats probably not it. It could also be the codec you are trying to use. Your computer may not be fast enough to handle it. I assume you are just digitizing DV media? which in that case, your computer speed should be fine and its most likely the capture disk. However, if you are trying to digitize uncompressed media for any reason, it is very likely the speed is the problem... Angie
[DV was created alongside firewire. Firewire was designed to accommodate digital DV transfers. 400 is fast enough (although it lags less when you're editing on 800)]
Oh, it's great for capture. Lousy for complex multistream edting. FW800 is peppy but the protocol is "chatty" and can sometimes interfere with itself-- many report problems capturing DV to a MacBook Pro with an external FW drive attached. One solution: an Express 34 Firewire card to isolate the FW busses. Leave camera or deck on native port, route drives into card bus, or vice versa. Second soution, eSATA I or II drives. A better sltion for towers but I think it's available for cardbus. FieWire isn't dead tho-- the newest prototcol being readied is allegedly blazing fast and uses 1394b (FW800) cable and connections. Stay tuned. - Loren Today's FCP keytip: Toggle Audio Scrub with Shift-S ! Final Cut Studio 2 KeyGuide? Power Pack. Now available at KeyGuide Central. www.neotrondesign.com
Hello everyone,
I still don't have a solution but I do have a work around. The format I am using is mini-dv, there should be no thru put problems. Also i have about a terrabyte of space overall and I am capturing to a drive with twice as much space available as I needed. This problem did start immediately after I approved a Quicktime update so I believe this may be the problem. Anyone know how to undo an update? OK OK I have an old 533 MHz PowerPC G4 with about 1.25gb of Ram, 4 internal drives and one external 5600 on the firewire, about 990gb of HD space with a Plextor810UF external DVD drive. OK I know I am way behind the times, but IT STILL WORKS FINE! Up to now. I have always been weary of updates but lately i have let my guard done. I guess I got bit. My work-around is: I have preserved OS9.1 for Photoshop6 and After Effects 5 and I have a backup boot drive with OSX.4.01 and QT.7.0.1. I have not updated the backup boot drive and I have all of my crucial programs installed there as well. I booted to this drive, and turned off my preference which stops video capture if there is a drop frame, and I was able to capture a half hour program I produced. Hooray! for back up boot discs and the ability to have multiple drives and multiple Operating systems. Anyone else have any problems with the lastest update of Quicktime? A few years ago, I had a problem with OSX and I was able to complete a project in OS9 with FCP2 while I sorted out my problems with OSX. Got to have a backup! Terrence
BS"D
Same exact thing happened to me about 2 months ago, right after I updated to Quick Time 7.3. Unfortunately, updating to 7.3.1 doesn't fix it. Are you using 10.4, or are you still on 10.3.9 like me? If so, someone sent me the instructions to get back to an earlier version of Quick Time. I'll post the link once I search for it.
BS"D
Here's the link - [docs.info.apple.com] But...it won't remove 7.3. I'm also stuck capturing 4:59 clips, which is especially frustrating when I have an hour worth of video to capture. Anybody know how I can get rid of Quick Time 7.3?
Sorry, only registered users may post in this forum.
|
|