|
Hi...I was having a lot of crashes in fcp 6.06 -- spinning disk. I trashed preferences and now when I try to open the project I get "unable to open project file"... ANY SUGGESTIONS on how to get my project to open now? I had turned off autosave, as I thought this may have been the spinning disk issue...HELP!
Sounds like file corruption/auto dismounting on the drive. What kind of drives are you using and how full are they?
![]() www.strypesinpost.com
Whenever you suspect storage as being a culprit for larger problems, I always suggest the same test. Move a copy of the project file to your system drive. Disconnect the suspected drive, including all the media for the project -- don't just turn it off, unhook the cables. Now try opening the project file from the system drive. If it opens successfully with media offline, then the problem is related to the drive. If the project still won't open, then you have larger problems embedded in either the FCP software or the project file itself, or your system drive has issues.
![]() www.derekmok.com
You're pretty much stuck until you can find a Final Cut Pro system that can open the file. Try an editing setup with a higher version of FCP. If it manages to open the file, export an XML to re-form the project file on your FCP6 system.
Alternately, if trashing preferences began the problem, you can try re-installing your copy of FCP. We can't rule out that it's software corruption, rather than the actual project file being corrupted. Both are possible at this juncture. Do any other project files open successfully on this machine? Do they behave differently -- ie. without the Spinning Beachball? Yeah, turning off Autosave and not having a manual backup protocol in place...not the brightest move. Basically it's editing suicide. ![]() www.derekmok.com
You might try the FCS Maintenance pack. It has a few tools in it that might solve this
[www.digitalrebellion.com] Michael Horton -------------------
The problem isn't just the project file, but you need to solve the problem with the beachballing/crashes. I suspect the beachballing has something to do with your drive. Did it beachball on all projects or just the one you were on?
The project file is probably corrupted. Does the last autosaved version launch? But let's go back to basics. Trash your FCP preferences. [www.lafcpug.org] ![]() www.strypesinpost.com
davidblumenfeld Wrote:
------------------------------------------------------- > Question is: If the file is corrupted, is there > any fix for that? If you can find a data recovery expert who specializes in salvaging Final Cut Pro projects, you may be in luck. However, Apple makes this very difficult by not publishing the FCP project file format publicly, so such experts will be few and far between, if they even exist at all. In short: if the data in the file is corrupt, you're probably out of luck. But that error message can be caused by lots of things and the data may be just fine. It's worth sending the file to someone else to see if it opens on their machine. My software: Pro Maintenance Tools - Tools to keep Final Cut Studio, Final Cut Pro X, Avid Media Composer and Adobe Premiere Pro running smoothly and fix problems when they arise Pro Media Tools - Edit QuickTime chapters and metadata, detect gamma shifts, edit markers, watch renders and more More tools...
David
Jon's FCS Maintenance pack be able to repair it. Please chime in Jon if you think it might help - not sure if you pointed it out already [www.digitalrebellion.com] There is a free-trial version available. ![]() For instant answers to more than one hundred common FCP questions, check out the LAFCPUG FAQ Wiki here : [www.lafcpug.org]
Good idea, Jon. I'm in Israel and not so many fcp people here...If anyone out there willing to try to open the file for me...PLEASE email me to david@blumenfeld.com and I'll send back the file....thanks!
db
Ben King Wrote:
------------------------------------------------------- > David > > Jon's FCS Maintenance pack be able to repair it. > > Please chime in Jon if you think it might help - > not sure if you pointed it out already > > [www.digitalrebellion.com] > m > > There is a free-trial version available. He tried it already. It fixes metadata; it can't fix corrupt data inside the file. My software: Pro Maintenance Tools - Tools to keep Final Cut Studio, Final Cut Pro X, Avid Media Composer and Adobe Premiere Pro running smoothly and fix problems when they arise Pro Media Tools - Edit QuickTime chapters and metadata, detect gamma shifts, edit markers, watch renders and more More tools...
I have time this morning David - have sent you an email - zip up the fcp project file before you send it.
![]() For instant answers to more than one hundred common FCP questions, check out the LAFCPUG FAQ Wiki here : [www.lafcpug.org]
No joy on any of my suites
![]() ![]() For instant answers to more than one hundred common FCP questions, check out the LAFCPUG FAQ Wiki here : [www.lafcpug.org]
Sorry, only registered users may post in this forum.
|
|