|
What equipment would I need to create a frame accurate (like avid can do) output of a show that originates on DVCPRO HD? I want to cut the show HD, then deliver an edited master DVCPRO HD tape to the facility for vfx and color timing, saving an online. In the past (DVCAM shows,) I have never been able to get FCS to make a tape that was able to hit the 1:00:00:00 mark for the start and be accurate all the way through. Has this changed?
For DVCproHD its not a big deal - but at least a RAID 0 of two or more SATA II HDDs is recommended by most of us via internal, eSATA or FW800 for DVCproHD work.
You will need to tot up how much storage you will need based on approximately 42GB per hour of DVCproHD Remember to include a 20% storage overhead for keeping the HDDs working well and at speed plus additional render space so look at a minimum of 30-40% extra storage after your source footage calculations. I'm looking at the solutions from Caldigit as you read this: [www.caldigit.com] Call Jon and discuss your requirements I'm sure he'll be happy to talk you through the options. For instant answers to more than one hundred common FCP questions, check out the LAFCPUG FAQ Wiki here : [www.lafcpug.org]
Sorry, only registered users may post in this forum.
|
|