|
Show all posts by userYour basic troubleshooting forum for all things FCP Legacy (FCP 7 and below.) And general discussion on topics that do not fit in the other forums.
Not registered? Click HERE to register now Re: Cant see audio wave forms in Viewer - 16 years agoThanks Jude, Ben and Derek for the replies, The OS on this machine is 10.4.8 and QT 7.1.5 any more advice would appreciated, DR Ceballosby drceballos - Café LA Re: Cant see audio wave forms in Viewer - 16 years agoThanks for the replies Tom and Ben here is a screen shot of the problem. when i double click my audio to load into the viewer, i get these, black bars that blocks me from seeing the waveforms. im editing on version 5.1.4 and yes i can zoom in and out of the viewer. thanks so much, DR Ceballosby drceballos - Café LA Re: Cant see audio wave forms in Viewer - 16 years agoThanks for the replies Derek, Michael and Jude, Yes, i did empty the trash after i dumped my waveform cache, and yes there is audio and yes the audio is linked. *sigh* however i is still have black bars blocking my ability to see wave forms in the Viewer. any additional help is very much appreciated Thanks, DR Ceballosby drceballos - Café LA Re: Cant see audio wave forms in Viewer - 16 years agoThanks for the reply Derek, i closed out of fcp, dumped my Waveform Cache files but no luck....i still don't see the waveforms in the viewer. any other suggestions would be appreciated. DR Ceballosby drceballos - Café LA Cant see audio wave forms in Viewer - 16 years agoHello, Im sure this is just some sort of a settings issue, but I can't see my audio wave forms once i load my clips (either from a bin or sequence) into the Viewer. All i see are two black bars where my audio wave forms would normally be. My audio sequence settings is 16 bit 48 KHz and my media is 48 kHz as well thanks, DR Ceballosby drceballos - Café LA Re: No Audio for "Print to Video" or "Edit to tape" - 16 years agoJude/Koz thanks for the new thread. I enjoy learning new lingo like "crash record". However, i still didn't get any audio output with "Edit to Tape" when i switched my 'Audio Outputs' options in the 'Sequence Settings' from default 0 to OFF. but thanks again for the help. May the FAQ be with you all, DR Ceballosby drceballos - Café LA Re: No Audio for "Print to Video" or "Edit to tape" - 16 years agoThanks again Koz for the feedback. unfortunally, in the "Edit to Tape" window in the lower right, everything is ON. Timecode, picture, and AUDIO are all yellow/On in that window. hmm, im really at a lost, but i really do appreacite all the correspondance. without this thread i would have never learned what a "Smash Record" is....haha DR Ceballosby drceballos - Café LA Re: No Audio for "Print to Video" or "Edit to tape" - 16 years agoThank you so much Koz and Loren for your wonderfull feedback. I have done some more "playing around" today and "Print to Video" to our DV deck is working fine. i just had the input setting on the deck set to video by mistake. As for "Edit to tape", to our Sony UVW-1800 Beta SP deck, im still having no luck getting any audio. However the deck does play audioby drceballos - Café LA Re: No Audio for "Print to Video" or "Edit to tape" - 16 years agoHi Koz, thanks for the reply Our audio and video is connected through analog XLR and component imputs into the beta sp deck. The monitor A/V signals are fed from the beta sp deck. As for the External settings in fcp under view i have them set to Video: Blackmagic NTSC 8 bit Audio: Decklink Audio and Audio follows video. During playback i hear everything fine, when im recordingby drceballos - Café LA No Audio for "Print to Video" or "Edit to tape" - 16 years agoHowdee LAFCUG, Something very strange happened today when i tried to "Edit to tape" out of fcp 5.1.4 though our blackmagic card to our betasp deck...no audio. I hear audio going through the monitor, but no audio got transfered from the squence to the beta sp tape. at first i thought it might be the card or cables or something hardware related, but then i tired to export though &by drceballos - Café LA Down Convert from DVC Pro HD to DV - 16 years agoHi Lafcpug, by the way, you guys are awesome. you've saved me from so many jams, i just wanted to thank you for all your technical support. i won't be at the meeting tonight, but i wish u all a good one. so here is my question, i couldn't find a really good tutorial on down converting from DVC Pro HD to DV. can you point me in the right direction? I have a project that was shot oby drceballos - Café LA Crashing when EXPORTING TO QUICKTIME - 17 years agoHello, Everytime I try to export to QUICKTIME Movie FCP crashes. First i tried to a new sequence, then a new project, then after about 5 more crashes, i re-booted in safe mode and repaired the disk permissions on my boot drive. 5 Crashes after that, i trashed my preferences. I tried again and to my dismay FCP *sigh* crashed again when i tried to export to quicktime using in and out pby drceballos - Café LA Re: Work flow Article using the Panasonic Varicam - 17 years agoThanks so much for Vericam Cam Article on Ken's website, that was EXACTLY what i was looking for. a clear step by step workflow for the Vericam As for final format, I believe the producer of the short wants to master to HD either on DV CAM or Digi Beta, and give out SD dvds. Thanks so much for the help Shane.....i mean The DUDE (great nickname by the way) :-)by drceballos - Café LA Work flow Article using the Panasonic Varicam - 17 years agoHello, I'm helping a friend edit a short shot with a Panasonic Varicam. I have not worked with this camera, and i was hoping to find a good work flow article on the internet that could walk me step by step in importing, cuting, and exporting out the footage. Any suggestions? I'm running FCP 5.1 on a 17" Mac Book Pro. thanks so much in advance, DR Ceballosby drceballos - Café LA Re: DV back to HDV - 17 years agoThanks so much for the tips. I will let you all know how it goes. cheers, DR Ceballosby drceballos - Café LA DV back to HDV - 17 years agoIs it possible to output back to HDV from a project file that was edited on DV? The original footage was shot on a Sony HDV camera. I worked on a job a year and a half ago running FCP 4.5, and to make the editing of the material much simpler, we downconverted the HDV material to DV. Fast forward a year and a half later, Now the client would like the same show, but now in HDV rather thanby drceballos - Café LA Can't CAPTURE NOW throught a timcode break. - 17 years agoI'm having trouble digitizing using "Capture Now" through a timecode break on my source tape. At the timcode break in the tape, FCP stops digitizing. I'm running FCP 5.1 and digitizing from a Sony Beta SP 1800 deck. Thanks, DR Ceballosby drceballos - Café LA Audio Playback Problems - 17 years agoI'm running FCP 5.1 and im having problems with my playback audio. I'm using a Sony DSR-11 deck to output my audio and video to a monitor. Unfortunally, under VIEW, when i set my audio playback settings to DV FIREWIRE, FCP crashes on me. A few times i did get the audio to play, but it was just static. To get FCP to not crash i changed my audio playback settings to DEFAULT or BUILT IN AUby drceballos - Café LA Exporting QT Files to Motion from FCP - 18 years agoI am exporting full resolution QT files from version 4.5 FCP on to a hardrive. Then i am dragging them into the layer menu of a Motion 1 template, however in Motion, the video clips have "lines" / "distortion" in them. My sequence settings in FCP and Motion are DV NTSC. How can i get rid of these lines? thanks, DR Ceballosby drceballos - Motion Re: What is a GENERAL ERROR - 18 years agoThanks for the input everybody. Copying and pasting the timeline onto a new sequence did the trick. :-) take care, DR Ceballosby drceballos - Café LA What is a GENERAL ERROR - 18 years agoIm running fcp 5 and I keep getting a GENERAL ERROR at the same frame in my time line. what is a GENRAL ERROR, and how can i correct this. thanks, DR Ceballosby drceballos - Café LA mp3s @44.1K to 48K - 18 years agoHello, How would i convert mp3 audio files at a sample rate of 44.1K to 48K? Thanks, DR Ceballosby drceballos - Café LA Re: No Audio on Print to tape - 18 years agoThank you very much Shane, that was the problem. DRby drceballos - Café LA No Audio on Print to tape - 18 years agoHello, I have a canon zr camcorder as a deck, but for some reason when I print to tape (using 4.5) my picture comes across, but no audio. could it be my camcorder or my settings in FCP? Thanks, DRby drceballos - Café LA Re: DV back to HDV - 18 years agoThe reason we want to go back to HDV is for future broadcasts that require HDV. Thanks, DRby drceballos - Café LA Re: DV back to HDV - 18 years agoIf there is a process I would really like to know. Thanks, DRby drceballos - Café LA DV back to HDV - 18 years agoHello, I was wondering if anybody could help. I have a project that was shot with a Sony HDV camera and i imported the footage into my computer, using version 4.5, with the i-link function on. Which i believe converts HDV to DV. Now that i have finished editing my project, is there a way to go back to HDV from my DV footage? thanks, DRby drceballos - Café LA Render Manager Help - 18 years agoI've never recieved this error before, so I am a bit lost. I'm am rendering my sequence when a Render Error message pops up. FCP-HD asks me to free up space using render manager. So i checked off everything in render manager to remove and my sequence still won't render. Please Help, D.R. Ceballosby drceballos - Café LA Re: Time code burn - 18 years agoThanks Andy, Nesting worked like a champ! DRby drceballos - Café LA Time code burn - 18 years agoI'm trying to put a time code burn on a 20 min sequence. Please help. I found the Time code generator and reader filters under Video Filters in Effects. However how do i add filler or black to generate the time code. Do i need to add one 20 piece of fill? And after adding the filler, would i need to crop out the time code generator? So i don't superimpose my image with black and time codeby drceballos - Café LA |
|